Skip to content

Intermittent fault with fuel guage readout

Featured Replies

Hi All IMy 2011 Superb wagon 3.6L has an unsual problem with its fuel guage readout on the dash. I have tried searching here for ideas several times but no-one seems to have had a similar problem to mine. Often when I start the car the fuel guage will read the correct amount then within a minute or two of driving the needle will drop to absolutely nothing ie as if it is not even connected. Sometimes when I turn off the car and restart it the guage will read the tank level correctly and the it will drop to nothing soon after.

It is NOT a problem of reading the amount in the tank in correctly. When it does operate the guage shows the correct fuel amount. It is simply that it provides a correct reading when I turn on the car and then soon after it doesn't show anything. I have tried cleaning the contacts at the fuel sender unit in the tank and I see nothing in VCDS which assists me.

Any thoughts on what is causing this - I don't to just buy parts without knowing they will solve the problem.

  • Sponsor

I had something like this on a Vauxhall once. Turned out that the mechanical arrangement of the sender unit in the tank had become a bit misaligned or bent so that the wiper contact(s) were losing their pressure against the carbon track(s) of the potentiometer in the tank.

A bit of gentle bending of a metal rod to improve the contact pressure sorted it.

No idea if the physical arrangements were similar enough to what you have for this to be a plausible explanation in this case.

Did you take any photos while the pump/gauge sender were outside the tank?

  • Sponsor

A dry/cracked solder joint at the instrument cluster connector might give similar symptoms too, I guess?

Wondering if you have had any luck fixing this problem, fuel gauge in my 1.8 Superb has started to have same issue.

  • 2 weeks later...

I've had this issue on my 2009 3.6L sedan for a few years. Happens every now and again, but usually shutting off the engine with a full tank of fuel and then removing the battery overnight makes it go away for a good while. I suspect it has something to do with a bad solder join or bad connection. I have been told it is possibly rust / corrosion in the tank on the sender unit too.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.