Hello! I’m looking for some help — maybe someone has already encountered a similar issue and knows how to fix it.

A Virtual Pedal was retrofitted to my Skoda Octavia A8 2020 (MQB-EVO), but I’ve run into a coding/adaptation issue: some required parameters for full activation are missing.

The following settings in 09 – Central Electronics → Adaptation are already configured correctly:

Virtuelles Pedal

• Virtuelles Pedal → active

• Virtuelles Pedal HMI einstellbar → active

• Virtuelles Pedal HMI Auswahl → active

• Kick and close → not installed

• Kick and close HFS → not installed

• Kick and close HBFS → not installed

Virtuelles_Pedal_Global

• Virtuelles Pedal Verbau → installed

• Bremslichtquittierung → active

• Bremslichtquittierung bei offenem Heckdeckel bzw. -klappe → not active

• Quittierungslicht Max → 9000 ms

• Sperrzeit Bewertung Spotlight → 0 ms

• Virtuelles Pedal HFS Verbau → not installed

• Virtuelles Pedal HBFS Verbau → not installed

However, the following parameters are missing, which seem to be required for further configuration:

• Control module rear lid opening, dataset

• Control module rear lid opening, vehicle type

My question: could this be related to the parameterization of module 09 (Central Electronics)?
Would this require a different parameter set, firmware update, or even replacing the module?

My current module:
5WA937086K
Current firmware:
5WA937086R, version 0136

I’d really appreciate any advice or experience from someone who has dealt with a similar retrofit on MQB-EVO platform vehicles.

After the first codings with the "Virtuelles Pedal" in block 09, a data set mismatch error will appear for the Rear lid opener control module, indicating that the EasyOpen block has been connected.

On 22.05.2026 at 20:09, RazorG said:

Після перших кодувань за допомогою "Virtuelles Pedal" у блоці 09 для модуля керування відкривачем кришки багажника з'явиться помилка невідповідності набору даних, що вказує на підключення блоку EasyOpen.

What needs to be done to fix this?

Maybe I’m doing something wrong?

On 26/05/2026 at 13:13, OLek25 said:

What needs to be done to fix this?

Maybe I’m doing something wrong?

I think probably u need diffrenet dataset for read lid module with virtual pedal