Is there an installation guide for retrofitting a reverse camera to an Octavia mk4? I have bought one from Aliexpress (https://aliexpress.com/item/1005004766200629.html) but I'm afraid to break things.

I have bought and successfully installed this one https://www.aliexpress.com/item/1005006263043091.html it should be the same one and OEM! The seller referred me this manual https://aiduauto.com/blogs/installation-manual/skoda-octavia-mk4-evo-rear-camera-install?srsltid=AfmBOor_4VQeI-8HV9o051odIiFk-0o78mooUIBaezjqMjpBkbpe8d1o

For disassemble interior I have followed this guide https://youtu.be/rWVycZsKrEU?si=EgI1TYuyRBRKmzvB

It was quite a strenuous job and I wouldn't attempt it again, however camera fits and works excellent just like original, a big improvement IMO.

PS: be extremely careful when disassembling tailgate wiring grommet clips.

Edited Wednesday at 13:114 days by mmt

Thanks! That looks great! Did you have to do coding to the car?

1 minute ago, RedPixel said:

Thanks! That looks great! Did you have to do coding to the car?

Yes, adaptations and coding via OBD11 pro subscription needed

Hi, what instructions did you use? All 3 pins to connector under steering wheel or 2 pins to connector and 12v pin to fuseboard? Thanks

Edited 10 hours ago10 hr by Weeguy

I connected on my mk4 2020 all 3 to gateway t32 connector but I got plans to connect red wire to fuse box probably when I will be doing heated steering wheel so you can use both methods

Thanks pins 1,6 and 7?