Hi all - done a Vag-com scan today using version 303-1, and turned up some codes, as follows:

Address 01 -------------------------------------------------------

Controller: 036 906 034 BK

Component: MARELLI 4LV 3335

Coding: 00071

Shop #: WSC 21013

TMBMD46Y2Y3044246 SKZ7Z0Y0502871

1 Faults Found:

17573 - Long Term Fuel Trim Additive Air Bank 1: Range 1: System too Rich

P1165 - 35-10 - - - Intermittent

Readiness: 0000 0000

Address 03 -------------------------------------------------------

Controller: 6Q0 907 379

Component: ABS 5.7 FRONT V00

Coding: 00044

Shop #: WSC 13765

1 Faults Found:

01314 - Engine Control Module

49-10 - No Communications - Intermittent

Address 09 -------------------------------------------------------

Controller: 6Q1 937 049

Component: BORDNETZ-SG. 1S30

Coding: 01530

Shop #: WSC 21013

1 Faults Found:

01314 - Engine Control Module

49-10 - No Communications - Intermittent

Address 17 -------------------------------------------------------

Controller: 6Y2 919 870 B

Component: KOMBIINSTRUMENT VDO V06

Coding: 22442

Shop #: WSC 21013

TMBMD46Y2Y3044246 SKZ7Z0Y0502871

1 Faults Found:

01314 - Engine Control Module

49-10 - No Communications - Intermittent

Address 19 -------------------------------------------------------

Controller: 6N0909901

Component: Gateway K<->CAN 1S30

Coding: 00014

Shop #: WSC 13765

1 Faults Found:

01314 - Engine Control Module

49-10 - No Communications - Intermittent

Address 44 -------------------------------------------------------

Controller: 6Q0 423 156 E

Component: Lenkhilfe 0001

Coding: 00110

Shop #: WSC 00000

1 Faults Found:

01314 - Engine Control Module

49-10 - No Communications - Intermittent

AND THE ONES I'M MOST INTERESTED IN:

Address 46 -------------------------------------------------------

Controller: 6Q0 959 433 C

Component: 0J Komfortger

Have you had a remap done?

Have you tried to clear the codes?

Yeah, clear the codes, go for a drive, and rescan.

Sorry, should have said, I did clear the codes and re-tested. The displayed codes above are what I got on the second scan.

I don't know what a re-map is, so no, I probably haven't had one done!