Hi all,

Is it possible to program the mk1 octavia to wind up the windows via the keyfob?

Anyone done it?

Only thing i've found is:

Many Audi vehicles can be recoded to allow this function,

see this example.

Unfortunately, most VW models do not have the same capability. In order to make your windows roll up and down using your remote in most older VW models, you'll need to add extra hardware such as the

Remote Window Controller from Alientech

.

The

Mk5 based vehicles

such as the latest Golf/Jetta/GTI and B6 Passat can have use

these instructions

.

It should do it without the need of reprogramming with Vagcom. Next time you are with the car push and HOLD the unlock button and all the windows should come down and push and HOLD the locking button to make the windows come up!.

It's a standard feature iirc.

It ain't sorry you need a controller programmer, there's a thread in the mk1 octy section somewhere.

Failing that mluton got one working for about

you need a KVW 100 programming unit or an eeprom programmer and suitable cable (not vagcom).

Not these days Ed you can buy a "black box" which you plug in twiddle the key back and forth a few times remove the box and jobs a good un for about 30 quid

Not these days Ed you can buy a "black box" which you plug in twiddle the key back and forth a few times remove the box and jobs a good un for about 30 quid

Yeah that's a KVW 100 (Notes :: KVW100 Window Roll Up/Down Flash Load Module) like I said. The other method is free if you already have the equipment and instructions can be found on the internet.

Yeah that's a KVW 100 (Notes :: KVW100 Window Roll Up/Down Flash Load Module) like I said. The other method is free if you already have the equipment and instructions can be found on the internet.

Sorry Ed mis-read you there....its a bit late/early