Jaspire

Have just stuck a post on your sale ad

How much you after for the front hubs complete, excluding calipers carriers, etc?

I'll have a look and see if I can get the necessary vrs gear to swap my daughters pd100 elegance hubs over so these will fit. Was going to upgrade to 312mm at some point, so might as well get a better upgrade. If she gets her licence back (medical reasons, she wasn't naughty ), she is going for her race licence and going to use he car on track days, so better bigger is better and all that.

I'll pm you when I get a minute. If you could send me a picture of them in reply that would be great. Lennie

Have refurbished my daughters Montreal I wheels, and was wanting to get some Centre Caps for them. The wheel part number is 1J0 602 025 F, and apparently the original centre cap part number is 1J0 601 149 A GRB, pictures of both supplied below. I could just get the VW ones and put a stick on badge over it, but if possible I was wanting to fit an original Skoda Centre Cap. Has anyone possibly fitted these wheels and managed to find a Skoda Centre Cap that fitted? Cheers Lennie

Aye that's fine, ping me your paypal or whatever and I'l get you squared up and give you my address. Lennie

How much would the rear lights be posted please?

I bought Brimma's Fabia 'for my wife' a couple of years ago, and the Top Mounts need changed, so I was going to order new springs while I am there and just change them. The only thing that I have ever wanted to change on the car was levelling it out suspension wise. The B12 Kit fitted uses the Eibach Pro Kit springs which for the Estate lowers the front 30mm and the rear 20mm. I don't have a problem with the 30mm, another 10mm wouldn't kill the car, but I have a Maxton design front splitter to fit at some point, so I'll leave it as it is, however I would like the rear dropped a bit, as I feel it still looks a bit out of kilter with only 20mm. I understand the though process behind it only being 20mm, but the heaviest thing she puts in the boot is the dog, and that's a rare occurrence. So will the Hatchback 30/30 Kit fit the Estate ok and has anyone done it? (my brain says it obviously will, but it's not very reliable at the moment ) Thanks Lennie

Fixed 3 other spelling errors and missed that one.

Fixed it!

Hub Carrier sounds about right. Hub carrier, hub and wheel bearing assembly, caliper carriers, calipers, pads and discs. I think that's right.

I have done it on my vRS, and will be doing it to my daughters Elegance next month, with new rather than used parts. I know to fit the 312mm calipers and carriers, I need to switch over to vRS front hubs, but I am having a complete brain fart moment this morning, and cannot remember the name of the part to bolt the bloody carriers and bearing assembly too for the fronts. I want to say stub pin or hub, but,like I say, am having a complete brain dead moment. Also struggling to remember what I need on the back for 256mm upgrade. I am sure as it is already disks, that it is a straight forward caliper, disk and pad job, but looking for confirmation please. Any help? Cheers Lennie

Mate has been putting his wee vRS back to standard and has the private plate for sale due to switching to a Fester ST(Boooo!!) Currently on a retention certificate, and he is looking for about £400 for it. Anyone interested, PM me and I'll send you his number. Cheers Lennie

Wonder if these will fit a mk1 Fabia? What age was the Vroomster?

Aye its that white bit that's missing. Thanks.

No its actually this bit the arrow is pointing at in the bottom picture. Hers isn't like that though. Which makes me think they aren't the original lights now.

Aye I'll message Rich and see to f he has come across them. Cheers

That pic looks like my xenons did, but on her elegance it is normal headlights, and it looks from what I can see, as if there should be a bush or similar which has a cup end and the other end has what feels like three slotted gaps in it to slip onto the height adjuster. Thanks. Lennie.

Anyone have any idea where I can get the clip on bit that goes between the adjuster motor and the back if the headlight? My daughters off side headlight wasn't adjusting and I discovered the adjuster motor was missing. Thankfully I have 2 or 3 in the garage, so I went and fitted one, still not moving. I assumed they were the same as the xenon's I had on my old vRS but they aren't. The motor is working, but the bit that the ball section of the motor arm pushes into is missing. Any ideas what this looks like or where I can find it? Cheers Lennie

Are they heated?

Thanks, just need to get the boy to Photoshop the car white now

Do you have any pictures of them on at all?

Have they been fitted to anything?

Pm sent

It's still listed, so I assume the splitter is still available? Lennie