frenchieg

You had these in your skoda?? :think:

Cars looking good so far. Does your arm rest tilt up or have you lost use of cup holder etc?

Ha didn't even notice that it looked so standard :-D

Thanks for that. Engine bay looking sweet there mate

Cheers for that. Glad you got yours sorted. Which silicone hosing did you use?

Yep read that through a few times so got an idea of what to do but just wondered, as my time is tight, could I do individual deletes whilst using the car in between or would this cause dramas?? Cheers

Any chance I can carry out these deletes one at a time? As in delete sai one day, drive the car, do n249 delete the next day etc?? Cheers

Pretty sure it was these guyswww.vwspares.co.uk No more then £15 delivered. Could have even been £12 delivered but can't remember now:-D

Just replaced mine with 17mm on a 19mm bar (standard original). Smashed the plastic colars off though that come on the bar as standard. There are loads of threads on this if you do a search. I ended up buying bushes off one of the shops from here as I couldn't find 17mm anywhere. I'll try and dig out where I got them from

What phone do you use as I was looking at a headunit like tbe one you got but read they don't work well with Android?

Think you get a jubilee clip with it also;-) Sorry couldn't resist! ! No doubt it will have possibly a cone filter on the end of the pipe which will be hidden in lloyds picture as it will be located behind the front bumper down the bottom of his IMMACULATE engine bay. Someone correct me if I'm wrong

Kentphil1: Thanks for that I will have a look at bowders at g man. I know what you mean about ?'s build thread, I had to stop reading it as my imagination was going crazy!;-) Chrisw: Thanks for that info. I think it maybe part of the deletes so will read up on them. If it is I may tape it temporarily until I decide to do delete. Thanks for your help guys

its definitely number 26 off the diagram I posted but its rubber not plastic?? If its part the sai for instance that can be removed then is that they way to go? I'll be getting it remapped in future so can get r tech to map it out if needs be!? I don't want to replace something that I will eventually remove anyway?

When you say 'the 3 pipes' do you mean the one from my earlier post?? If so what is it for?? Cheers

Hear you there buddy. No worries about enjoying my car as its not affecting the performance, if it is, then who needs to bother with a remap I could just go and spend £21 on a hose that seems to have an affect on the car or I could put that £21 to upgrading several hoses in one go Or remove whatever does not seem to affect the cars performance, and like you said enjoy the car. JUST NEED TO GET THE EML LIGHT OUT AS ITS DOING MY NUT

Any ideas guys on whether to bother upgrading this hose or not? ?

Any ideas guys on whether to bother upgrading this hose or not? ?

Black grill still available?

Stunning :love: :love:

Found diagram same as dealer gave me. He said its number 26 from the diagram above. Anybody know what it is and if I should upgrade when I replace it?? Like I said previous posts performance wise car feels great!

I come on this thread every day just to look at that part of your engine bay :love: :love: Free bumpty

this is where i'm confused :think: All posts above I have read on different threads and they do not look like the one I need to replace?? The diagram I got from dealer was of the inlet manifold, or that's what i think it is?/ I would say that's the rocker cover, or equivalent, in the picture above? If i'm wrong please be gentle as i'm still learning myself around engines in general However I have a different picture showing the inlet manifold (or the silver block at front of engine where the throttle body attaches to at one end??) The pipe I need looks about 6 inches long with a right angle bend??

Ok I have my eml on with car running what I feel as perfect but obviously something wrong as light is on. Diagnostic is showing the p0171 code (system running lean). I have identified a split hose going into my inlet manifold. If you look at the manifold where the dip stick is just to the right and behind it are 2hoses both the same size, the one furthest right has a big hole in it! Went to skoda dealer and they want £21 for a new one but gave me a diagram of the hoses and it only looks about 6inches long. They didn't say what hose was or where it goes too. I did ask but weren't sure. So my question is does anybody know if I should upgrade the hose or just get a replacement? Like I said car is running fine just got light on which is bugging me. Your help is appreciated. Thanks Regards