BATVANVRS

Open to decent offers

Open to decent offers

I think it's suitable for Gen3, check the link below & see if your vehicle is listed but I'm sure it's Gen3. I have a Golf (R) estate 2020 mk7.5 & it says it fits this along with other models. https://mst-performance.co.uk/mst-vw-mk710-air-intake-silicone-hose-oversize-turbo-inlet-elbow/

I found these in my draw as these was on my Skoda vRS Mk3 Octavia before I sold on the car 3 years ago. 3 of them are brand new (unused) 1 is used as I purchased another set at the time to just replace 1. As you can see from the pictures 1 is used as 5 pieces of the black honeycomb are missing but you could use a sharpie to colour them in. Here is a link to them https://www.kopacek.com/skoda/octavia-iii/center-wheel-caps-rs-honeycomb-design-black-16 £24.00 posted (royal mail) please pay via PayPal & I will get these sent out ASAP.

Not really mate as it's not worth my while tbh.

Selling a brand new MST intake hose, turbo elbow along with a RamAir ProRam panel filter & front grille blanking plate. I was going to do the pikey mod but decided to not bother (as I extended my warranty) Suitable for all 2.0TSI EA888 engines. The pictures are all genuine, I was selling on a different forum (but with no interest) so thought to try here. I've just used the same pictures but I can send you newer pictures if you'd like. I paid about £250+ for all the items combined. I'm selling for £170.00 including delivery via Hermes or Royal Mail. (Tracked) PayPal as friends & family, I'll get this sent out ASAP.

@MO230 The size that fits the screws 🤣 Honestly I can't remember what size, I just went in to a car factors shop & showed them the screws that came with the diffuser & they gave me the fasteners needed.👍 Sorry for the late reply but I don't venture much on here.

Sorted

Sorted Sorted Sorted Email address is dodge mate so nothing for you... Sorted Sorted Sorted Sorted

Sorted

I feel exactly the same with mine to be honest As of when I feel the need to switch! I will look at a Superb Sportline estate or maybe a Golf R estate (7.5) Have looked around but not in a major rush.

Big shout out to @EBCBrakesUK for receiving my yellow stuff brake pads today & thanks again...Top banana

Wow Thanks a lot @EBCBrakesUK I never hardly win anything...Well happy mate, will PM you now

One for sale on here

As per @ahenners No I went for Febi Bilstein ones. The Superskoda set came in about 50 euros including delivery and I read that they aren't quite as good. Would have taken longer to come too. The Febi struts are perfect in strength, they can lift the bonnet unsupported after initially lifting it. They slow before they come to a stop at maximum extension too. 2x Febi Bilstein 27709 struts. About £14 each from an eBay motorparts seller. 2x M8 ball joints with a 10mm ball head and 25mm thread length: https://www.sgs-engineering.com/x4-ball-extension 2x M6 ball joints with a 10mm ball head and 12mm thread length: https://www.sgs-engineering.com/x2-ball-extension Above ball joints came to a tenner with delivery. 2x M8 and 2x M6 washers. Bought from an eBay seller for a couple of quid. You also need an M10 spline bit to undo the bolt on the bonnet which I didn't already have. Painted the washers and ball joint bolts with a touch up kit I already had to make them blend in and look more OEM. Total cost probably about £42 but happy with the result.

Sorted

Most of my car pictures seem to always be outside my home (After cleaning)

Me neither...

Sounds like a damaged ignition coil or the long rubber piece but sounds like a coil from when removing, surly you must be able to feel if the car is misfiring... If you lay the power on quick, like plant your foot hard does the epc fault light come on & the car goes in limp mode until you pull over & restart.

The PY21w is a straight swap, fit like for like but the new LED style if I remember correctly are slightly longer in length but they should still fit ok.

Changing the panel filter from "OEM" to a "K&N" wont make any difference whatsoever! You'd be better off keeping the factory "OEM" but changing to a induction kit like the racingline R600 https://www.racingline.com/vwr12g7r600 or https://www.mountune52.com/collections/mk3-octavia-vrs-5e-2014/products/x3-intake will make a difference.

https://www.powerbulbs.com/ Put your car details in & it should explain what the H21W is for.

As per @ahenners No I went for Febi Bilstein ones. The Superskoda set came in about 50 euros including delivery and I read that they aren't quite as good. Would have taken longer to come too. The Febi struts are perfect in strength, they can lift the bonnet unsupported after initially lifting it. They slow before they come to a stop at maximum extension too. 2x Febi Bilstein 27709 struts. About £14 each from an eBay motorparts seller. 2x M8 ball joints with a 10mm ball head and 25mm thread length: https://www.sgs-engineering.com/x4-ball-extension 2x M6 ball joints with a 10mm ball head and 12mm thread length: https://www.sgs-engineering.com/x2-ball-extension Above ball joints came to a tenner with delivery. 2x M8 and 2x M6 washers. Bought from an eBay seller for a couple of quid. You also need an M10 spline bit to undo the bolt on the bonnet which I didn't already have. Painted the washers and ball joint bolts with a touch up kit I already had to make them blend in and look more OEM. Total cost probably about £42 but happy with the result.

Checked mine & all is perfectly fine... I must be one of the lucky ones, 7 year old vRS, soon to be 8.

Sorted