lab4games
-
Posts
149 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Posts posted by lab4games
-
-
My car didn't come with the light sensor on the windscreen. I only had humidity sensor.
I have done the retrofit to a RLFS sensor (rain, light, humidity). Retrofit an auto light switch.
Added a cable between light switch and BCM.
Auto wiper works fine.
Humidity is fine.
Auto light works fine when key is in car and when car is running.
The only thing I couldn't get it was the auto CH/LH lights. I have enabled the CH / LH menu in bolero. Have enabled comfort illumination for CH LH from vcds.
I still need to flash the high beam to get CH lights. My headlights wouldn't light up when I unlock the car even in AUTO mode.
I am not sure what am I missing in terms of coding. How should I troubleshoot?
-
wait for the RHD VW Atlas.
-
i have the octavia estate. i am 1.8meters tall. 3 young kids in the rear.
2 kids are in a rear facing child seat. the other in a forward facing child seat. had to find seats that are narrower in width to get it fitting 3 in a row.
i can't move BOTH front seats all the way back without hitting the two rear facing child seat.
given a choice i wish i could have more leg room at the front. so ya i find that octavia is not big enough for me. a superb would make more sense, or even a Kodiaq.
boot space on the octavia estate is good enough though.
it is NOT fun fixing the child seats because i cant use isofix anymore with 3 seats. isofix is found on the centre of both left and right seats. if i use isofix for both outer chairs, i can't fit another chair in the middle seat. you are better off with a car that has 3 ROWS of seats.
-
MANN Filters have both standard and cold climate air filters.
same goes for other variants of octavia.
-
-
There are a couple of front sensors for golf mk7 on aliexpress. how to determine if it is suitable? the prices are more reasonable.
New VW Golf 7 MK7 VII Park Pilot Front and Rear 8K OPS 5Q0 919 294 E LHD UPGRADE KIT 5Q0919294E
New VW Golf 7 MK7 VII Park Pilot Front 4K OPS 5Q0 919 294 E LHD UPGRADE KIT 5Q0919294E
-
-
-
Is the new value = "incremental controlled over time"?
-
Looking forward to updates
-
Is the difference between bolero, Amundsen, Columbus only with the control unit? Is the touch screen similar for all 3 variants?
-
anyone fitted the pedal box or CRD-T to a 1.6 TDI? would like to hear some reviews
-
Thanks @GAFF! Appreciate it.
- 1
-
On 12/15/2015 at 15:05, GAFF said:
I got a box from dealer, the speed nuts(×4), screws(×4) and blanking covers (×2) were NOT part of the box order.
We eventually found the right part numbers for the screws and blanking covers, I ended up getting the speed nuts in partsforcars shop.
IIRC There was confusion but for drivers side of my car (RHD) I ended up ordering a Passagers side for a (LHD).
i bought the box from the parts dealer but it didn't come with speed nuts or screws. could anyone help out with the part numbers for the speed nuts and screws? thanks
-
6 hours ago, Paulius55 said:
It's 29cm to the top of the variable floor and 40cm to the top of the real boot floor underneath.
Thanks!! That helps a lot
Planning to get it
-
On 23/10/2015 at 00:28, ccs-digital said:
One thing I really miss from my Octavia II estate is the plastic tray that sat below the front section of the luggage cover. It was ideal for raincoats, brollies and numerous other random bits that end up dotted around the car.
A perusal of the Octavia III estate accessories brochure brought the 'Multifunction box' 5E9 061 103 to my attention and I have recently bought one (£44 from the dealer - about the same as Superskoda with the postage).
It consists of two aluminium rails with a heavy vinyl panel between and it can be rolled up out of the way when not required. The front rail locates in two slots just behind the back seat and - when folded out - the rearmost rail hooks onto the forward 2 foldable bag hooks. Pictured below both in folded and unfolded mode:
At first I thought the vinyl 'shelf' seemed a little flimsy compared with the solid plastic 'box' in the Octavia II, but it claims to be able to hold up to 3kg, and certainly offers more usable space. Unlike the box in the Octavia II which could only be accessed from inside the car (under the lidded section of the luggage cover behind the back seat) this one can only be accessed from within the boot - which on balance I think I prefer. Lifting the hinged section of the luggage cover still gives access to the area of the boot behind the back seats even with the multifunction box deployed.
Given the amount of use it has had in the short time I have had it, I think it was a worthwhile investment and it further increases the versatility of the estates boot.
What is the height between the boot floor to the bottom of the vinyl when unfolded? Thanks!
-
3 hours ago, aki78 said:
Those are not dimmable but you can paint some LEDs with a back/blue permanent marker, that works.
-
Hi, i have installed some really bright led for interior roof lights. I would like to adjusting the brightness but Realised there's no setting in the bolero screen to do so.
Is there any way to adjust by vcds? If so what is the parameter to change?
Can we enable adjustments of interior lights via bolero screen? Thanks. !!
-
On 2/17/2017 at 21:18, Esseesse200 said:
Just send an email to H&R in Germany and they will come back to you really quickly with part numbers etc.. for arb and lowering springs..then just Google the part. I bees or pop it into eBay.de and you will get a bargain.. they are a really comfortable ride even fully loaded with ski kit, roof box and 2 kids. Never looked back on my estate. Was so impressed I have them on the wife's Fabia vrs too.
hihi, did you change the springs only? how about the shock absorbers?
-
On 25/02/2017 at 03:54, arnold said:
Today i fitted my footwell lights all boldsport but with the optional 6000k led lamps . When i got the kit connected i connected everything up and tested in home with a 9v battery to make sure all was fine which it was . Fitted and routed the cables today and connected to the bcm pin 72 then started the coding. I couldn't find (8)-Interior light; light configuration-Fussraumbeleuchtung as per the instruction but i guess as mine is a newer car i just found light configure which was in english footwell lights. I activated this and commenced with the other adaptions which were all there as per the instructions. I have the option under lighting on my amundsen to adjust footwell brightnes but no light at all . i double checked that i connected to pin 72 on the bcm. I have placed a multi meter on the first connector from pin 73 and earth and no voltage at all. ANY IDEAS ANYONE.........? Oh build is MY16 AND BRAND NEW VCDS 17.1.3
Go to
(8)-Interior light; light configuration-Fussraumbeleuchtung
Change value from ‘not installed’ to ‘installed’
(This puts the footwell light % setting in the infotainment system (under lights))
For my MY16 greenline, the German words are in English
Fussraumbeleuchtung is footwell light.
Thanks to all for the guide. I managed to do this retrofitting. It was really tough.
-
May i ask what made u go with eibach instead of h&r or other brands?
-
-
I found these set of lights that are very bright and pretty cost effective. 8usd for two led lights
-
i have this sound usually on cold when starting off the drive in the morning. it goes away after that. not sure how to go about troubleshooting.
Clunky gear change....
in Skoda Octavia Mk III (2013 - 2020)
Posted
i am quite fed up with my 6 speed manual gearbox. 1.6 TDI. fairly new car less than a year old. 26000 KM done.
almost everyday when i do reverse, it grinds into gear. it grinds like 1 out of 4 times. i am sure i did full clutch in.
doesnt matter if i engage the gear fast or slow. it still grinds.
sometimes i go into 2nd gear before engaging reverse. but it could still grind at times even if it's done that way. what's next?