Bigtow

Posted in the citigo project page but thought i would ask here to

Has anyone retro fitted a reversing camera to a 2020 citigo. I have found the part on car systems EU but it states does not fit certain head units. So I am assuming my head unit is compatible but would appreciate any information such as pin outs ect?

Sorry to bring up a old thread but could you not add footwell lights that are powered from the ambient lights that light the dash trim on a 2020 citigo?

still cant get the skoda connect app to work even been to the dealer and they cant get it to work. the thoughs are that the sim card has been removed at some point where are they located and cani get a replacement 2020 citogo ev sel ?

The car is telling me it needs my skoda essentials but I am having a nightmare trying to get it to connect. It keeps asking for milage then to drive 3 miles and put in the new milage then it says unsuccessful

Whst app do i need to download to connect to a 2020 citigo electric Se L there are so many to choose from?

Not sure if it's a sign of up coming problems but as i thought the drivers door had not locked. I tried lubricant in the mechanism and took the lock cover off to access the key slot this was a little stiff to turn but did move and now the door locks as it should

Got home from work early hours of morning ( below freezing temperatures) went to lock the car with the fob and all locks clicked then it sounded like one or more locks unlocked again red light on door flashed then went constant red. Drivers rear door was locked but it felt like the drivers door wasn't but as it was 3 am i didn't want to try and open the door incase the alarm went off waking everyone up. Is this a known fault?

what do you use to plumb up the camera washer. do you just use a Y splitter from halfords and some washer hose or do you use the Skoda kit. if you use the Skoda kit do you have a part number for it as i fond one on cars-equipment but they want almost as much to post it as the kit costs ?

the nice man at skoda said the pr code is 1zf and they should be 276mm

that site doent work but thanks anyway

Will have a look at that link when I get home from work and will give the local dealer a bell to see if they can shed some light on the subject. I am just not paying dealer prices to have them change disks and pads for over £300 Op o

Yup does not look like it's on here

Thank you but stupid question how do I find the vehicle code?

Anyone know what size disks are fitted to the front of a 1.6 d dsg estate it's a 64 plates euro car parts list 3 sizes 288mm 276mm and 312mm?

Thanks would rather use TPS if possible over euro car parts

I want to set my fog lights as DRL and turn the original ones off. I am quite happy to do the coding but I already have the fog lights set as cornering lights and to come on with the full beam. So I have already used 3 channels per light is this the maximum or can I add this adaptation?

Where do you recommend getting disks and pads from as just tried looking on TPS and they don't list them just fluid and brake clean

thanks will have to have another go through the coding

I finally got round to using my tow hitch in anger today with my bike rack and light board fitted and noticed some strange odditys. All the lights work as they should including the extra indicator light on the dash The reverse sensors cut out as they should and the trailer display shows up If I switch off the rear view camera. all good so far now here is what's odd my car is a dsg and I was lead to believe that the Eco roll mode should be deactivated when the car detects the trailer is attached also the alarm doesn't go off when the light board is unpluged with the car locked. I used my obd11 to code the towbar and it's not showing any faults when scanned any ideas?

I am having the same problem mine worked fine but the pin never fitted properly so am thinking about using a vag repair cable as this should have the correct size pin and then just splice into the footwell loom

i am thinking of doing the same mod and i am sure i found a guide somewhere if i find it i will post the link

Just checked my car with my obd11 and it looks like I have midline controllers so it's just the wiring that's missing and a but of coding. So I will be looking at a trip to TPS to see if they can get the correct plugs and pins and the wiring diagram

Hi I just re read your post regarding your mirror upgrade and while I am not in the position to search and retro fit power fold mirrors I would like to retro fit the red warning lights in the front doors and fit the puddle lights into the mirror housing. I am 99% sure I only have low line door controllers and noticed you had the warning lights and puddle lights with your midline controllers. Would you still have the controllers you removed kicking around?