Jrhoop

Mine fills every few days. This afternoon opened to find the wheel well half filled and mould growing on the carpet cover. I think it's the seal above the rear lights where the water puddles around the boot lid. I tracked it by taking the inside rear boot trim off and it comes in from a hole that holds an electrical wire clip. Never fixed it though and just have to dry it up at regular times.

My final input on this retrofit of power folding mirrors - more for reference for others if they need it. Door card off again, popped a voltmeter on the plug to check the power to the folding in and folding out wire from the module. I had a fair idea from this thread that it was pink and grey - Popped the wiring block open using the little clip on the side. It just slides out and then you can depin the pink and grey to swap them over. Put the block back together, checked it and voila. It works as it should. My OCD is still tweaking that its the wrong module but I'm sure it'll fade along with my insanity on the mirror modules and hardware/software versions. Who knows why my retrofit turned out to be a nightmare. Thanks to @langers2kand @ApertureS for your suggestions / help.

I've sent you a pm. Current modules I have in the car are here in the screenshots. Long coding looks different which I need to probably take a closer look at.

Bought another 2 facelift Octavia modules thinking that was the easiest solution. Both are from the same car so that rules out any issues there. Ending in K I thought that would be fine. These two pins are the wrong way around and so don't allow the plug to fit. Meh. Back to the drawing board.

You are the man! I'm hoping Gizmo is my man to get me out this mess so genuine will not be an issue. He sorted me out once before with some mini adaptations but this is way out my comfort zone. Appreciate the input @langers2k

Ok great. Rang Skoda and they want £144 just to look at it. How do I know what data set is required for the module. Are there forum members that can sort it for me or is it a dealer only thing. Driving to Wales next week and the missus wants it sorted before then 🫣

@langers2k- was hoping that you would have some info. Thanks! Yes I believe so also. Can this only be done using ODIS?

Still needing some help with this please. Changed the control module today to one ending in 593B. Rear window now works on the drivers side but the mirror still folds the opposite of the other side. When the car is locked it is open and then unlocking the car it closes. Don't know what else I can try to get this done.

Good evening, Looking for some help with the retrofit of the power folding wing mirrors today on my Octavia Mk3. Got the door cards off and replaced the mirrors, swapped over the modules. And did Sashas coding instructions for folding on the key fob which also works fine. Put everything back together and the problem I have is they have an opposite action. Unlock the car and the passenger unfolds whilst the drivers folds. I believe the incorrect action to be the drivers side as the rear window drivers side also does not work. Might I be right in assuming the control module is at fault? This topic suggests it might be the software version? https://forums.ross-tech.com/index.php?threads/8221/ But no idea about ODIS. Any help much appreciated.

Anybody know which is the positive wire to the puddle lights? Orange or blue? Thanks

Good morning Is there please an update for this - Sorry this is an old screenshot. My last update was MST2_EU_SK_ZR_P0478T

I'm guessing you can fit SEAT or VW modules without any hiccups as long as the part numbers are the same.....

Would love to update this as well please @pab567 Thanks in advance.

So just to check - the GFB-T9351 will be the correct fitment for my facelift vrs 230. Thanks for confirming.

I have this exact issue. I have tried resetting by holding up the buttons but still no joy. I press the button so it clicks for auto down and it doesn't roll the window down. Sometimes it does on the 2nd click. Happens both sides. Very annoying.