Rowls

No, it has falkens front, and avons back. Was looking for the michelins, seems to be more choice with the 245’s, guess thats why the car is wearing 245’s.

Thank you. Shows how much notice i’ve taken when i’ve been checking the tyre pressures that are listed there aswell! 🤦🏼‍♂️

Good afternoon, just wondering if anyone can help with this or has come across this before. Have a 2018 sportline 2.0tsi 4x4, currently has 245/45 R20 tyres fitted. When going on tyre sites and entering reg it is bringing up tyre size 235/45R20 as the fitment size. Are the 245’s the incorrect tyres that it has had fitted at some point or are they an acceptable tyre to fit? Only reason i can maybe see is that there is a lot more choice of 245 tyres available than the 235’s. Thank you.

Thats brilliant, thank you for the reply.

Afternoon, just a quick question. currently running a 2018 5 seat kodiaq which came with a boot liner included, part number - (565061163A). On tuesday i am picking up a Sportline 7 seat but majority of the time it will be left as a 5 seater. It does list different part numbers for the 7 seat boot liner, but just wondering if the liner i have would fit the newer car when left as a 5 seat? Don’t know if anyone has tried this or knows if i’d need to order a different boot liner or be able to use the one in my current car? Thanks.

Thank you for the reply. I’ll have a check of that when i get chance to see if it just needs a bit of sealant as opposed to a new gasket.

Good evening, i believe the gasket on my rear wiper motor is leaking as i am getting a trail of water running up the inside of the tailgate glass when i fully open the boot. Does anyone know the part number of this item, (No.4 on pic) and can it be changed without removing the wiper motor or does the motor need to come out to replace the gasket. Thank you.

I have tried this before on my 2018 se but didn’t have much joy. The bulbs I tried were great at lighting the interior of the car, but when the car was locked the bulbs wouldn’t fully go out, even after rechecking the car about 1.5 hours later they were still glowing dimly. Bulbs were canbus friendly but I just ended up putting the old bulbs back in. Not sure if the way round it is to change the full light unit for a LED unit, they are listed on eBay at the moment, just not sure if the connectors are the same.

I have a 2018 SE and have fitted one to my front passenger seat. I used a company called Scuderia car parts, they actually list the part numbers for a Bentley. The only part i didnt fit was the fabric cover over the bracket but the bracket is that low down on the back of the seat you don’t notice it. The part numbers i ordered are shown on the photo.

Thanks for the info. Guy at my work said he has an Autel Maxisys MS906 which he will lend me, and he has checked it has the epb function for kodiaq, so all good! Thanks.

Sorry for jumping in on this topic, I need to replace my rear brake pads, 2018 1.4Tsi, and won’t be able to get hold of a code reader/scanner in time that puts the epb in service mode so that the piston can be squeezed back in. Has anybody changed the rear pads by using the method of removing the motor off the caliper and using a ratchet to wind the parking brake off manually? Thanks.

Good afternoon, wonder if anyone has came across this before. Have just changed the interior 501 bulbs to LED ones as i thought the ones fitted were poor. The LED ones are a massive improvement, but just noticing that when you lock the car they are glowing slightly. The ones i ordered said they were canbus error free, which i presume means they have a built in resistor. Have left the car for about 15 mins now and it looks like they’re still glowing away. Not sure if they will sit glowing away all night and drain the battery although i imagine the current that is required to light them is minimal. The bulbs were just off ebay. Any ideas?

That’s great, thanks for the link there. Had a look at some on google but a lot of them were minimum order quantities. The link you gave me looks like just what I need. Thanks again.

Hi, wonder if anyone can help with this. I have a 2018 kodiaq 5 seat, which has at some stage, had the skoda dog guard fitted that required the holes drilled in the c pillar trim, to access the mounting points in the body. The guard has been removed but there is now a hole each side in the c pillar trim. Does anyone know of any blanking plugs that are suitable for this? I have tried local dealer but they are only saying new trims would be required, and they don’t do any plugs. Thank you.