nickalto

For retrofitting exterior mirror's area light. The pin is missing on 5Q4959392F.

Upgrade from 5Q4959392F to 5Q4959592F

Hello Could anyone tell me if it is possible to upgrade the front passenger door module and what should I look?thanks in advance

Hello I have a skoda fabia mk4 ambition edition hatchback 95hp and i d like to ask if anyone can help me providing the pin diagram of on-board electronic module!!I want to retrofit footwell lights and I must connect the power supply pin on J519 in order to make it work! The earth connection is already done. Thanks in advance

Hi i have same problem and i d like to ask which pins did you connect in 17b connector?thanks

My thought was if it is possible to retrofit electric heated mirrors in my car with all hardware and software needed.And if anyone has already done it and can give me all the information I need. I read some articles saying it is very difficult and I gave an alternative thought in order to avoid all this complexity if it is possible to have heated mirrors by wiring them to the RHW cables.

I first thought that this edition ,active, maybe comes with manualy controlled mirrors and heat function which is activated with HRW.I tried with no results!No luck!So probably it will need new wiring.My thought was if it is less complicated to wire the heating function with the HRW. I don't know if it is difficult nearly impossible to retrofit electric positioning mirrors with heat function that s why I am asking any help - diagrams ,wires ,connections. I have some experience with retrofitting infotainment system in my car which works perfectly even with hands free function. But retrofitting electric heated mirrors should be possible somehow.

Has anyone wired the rear window defrosting function with the heat function of door mirrors?I have a skoda citigo 2017 5door 1.0 petrol Active edition and the door mirrors doesn't have any heat function.They are manually controlled with no heat.Is it possible to wire them to rear window defrosting function?

Hello i followed your instructions and everything worked perfect!!all functions are activated and working without any issue!! the only problem we saw on my local vw dealer is that on diagnostics there are some bytes or codes which is not programed because my BCM unit was factory programed for a poor model version which didnt include an infotainment system.So i would like to ask if you have update already the BCM unit in your car and which codes or what coding did you do?i have obdeleven and vcds if i need to recode but i dont know anything about codes!!! thanks

hello again and thanks for the reply i did remove all plastic panels the only job that seems difficult is to remove the whole fuse box to have a better access but i think i will get it done without any problems!!!for the new cables i have to install i saw in the pictures a 0.35 diameter and some special metalic ends in order to put it inside the connector. Anyway i will come back with some photos of my work!! thanks again and if you have more useful tips to give me please do!!

Hello again after a good look to my car i realised that i dont have any connection between 20 21 pins of J533 and radio CAN H/L and also obd2 socket pins 8/9.So i must to put them myself but the problem is how to release fuse box obd2 socket and J533 support in order to have access to J533 connectors.I tried and i stopped cause i couldnt release obd2 socket.Any suggestions of experience?

thank you a lot!!!i will try it and see my results!!thanks again for your great help

Could you explain it with more details please cause I am not very used to car electronics I am trying but I don't have much knowledge!What is the CAN comfort?the obd socket I know it already I have an obdeleven for coding although I don't know the codes!!!The bsg unit is the belt-starter generator?in the photo there is the can pin high and low ?

Hi i am also trying to retrofit this model in my 2017 citigo and for the moment the official dealer told me that it must be wired with the can system of the car and even after that he is not sure it will work!for now the radio works on safe mode so it turns automatically off after a while but i can listen to radio stations!

Thanks for your help I will check this out with the Skoda dealer and I hope not to pay a fortune otherwise I will be in the sad position to give up my dream for a factory entertainment system!!

Hello I would like some help.I have changed the cd radio of my citigo 2017 active 1.0 5dr with a MIB2 swing model. The problem is that I don't have illumination of the buttons although the screen works and the Bluetooth demands me to activate the ignition although the ignition is on and the third problem is that the clock doesn't work.Any suggestions?thanks in advance