phdelia

remove negative pole from battery you turn the steering wheel up ,push down the metal clipper until its loose . There is one also in the opposite side you turn the opposite side looking up and repeat. Now airbag is free remove slowly because there are cables that you have to unplug. First touch the car metal frame to remove static from your hands

hello can you please share the 3D printed case file please

itIf you have placed the cable in the correct positions it should latch correctly i had exactly the same problem and everything was in correct position. The upper box if you disconnect the cable and you close it it remains closed. Try this only if the upper box is deassembled other wise you will lock it permanently. Open both boxes close them and hold them closed and push the buttons while holding the boxes closed. If it remains closed after you take you hand off you are done its repaired itIf you have placed the cable in the correct positions it should latch correctly i had exactly the same problem and everything was in correct position. The upper box if you disconnect the cable and you close it it remains closed. Try this only if the upper box is deassembled other wise you will lock it permanently. Open both boxes close them and hold them closed and push the buttons while holding the boxes closed. If it remains closed after you take you hand off you are done its repaired

if i remember i kept both boxes closed with my one hand and i pushed the upper box button 1or 2 times and the latches locked correctly. I may play also with the buttom bottom one . After that it remained closed opened everything again and closed normally. There is no calibration available for the cable

Looking at epc i cannot find a trim to cover the bracket. It does look strange that no cover exists.

how did you fix the upper glove mechanism i had the same experience now is always open and one latch is completely missing from its nest