passatman62

May just go to upgrade backs then. Fronts have had New pads recently stock Brembos. Just seems to need to be stood on a bit heavier sometimes.

Anyone upgraded discs and calipers on front of MK3. Something from an Audi perhaps S3 or S4. Currently have the smaller discs and sometimes feel a bit hairy braking under speed.

Noticed lately they seem to be struggling sometimes. Do they need lubrication and if so what kind.

Will get an auto electrician to look. This has been ongoing and someone pointed me to BCM

Any ideas of cost to replace the BCM 2016 sportline. Had the trim LED's disappear a while ago and think it's time to get them up and running again. Did have a blown fuse which got them working for a short while but they suddenly stopped again the dash and door ones, floor ones are fine. Not fuse gone this time 😞 or settings.

Just found it. Stamped on side of air filter. C3005

Mk111 2.0 diesel does anyone know part number for Mann Air filter please

Cheers All. Ordered last night, arrived 4pm and fitted by 4 15.

Hi all. Anyone have correct part number for pollen filter 2017 superb. Either Mann or Bosch. TIA.

Oh well motor ordered complete with resistor. Worth a try.

So finally, a break in the weather. motor was fairly easy to remove. Impellor a bit stiff so done the WD40 let's see if it does the job. However, if not a new motor it will be.

Cheers had a quick look and can see what you mean, few screws and looks like bottom of housing will twist out. Lots of people have used WD40 to fix as it looks common fult throughout VW group. Will also use a little white grease on it worth a try.

Update, just been out in dark, hammering with rain. Can now hear the motor temporarily run for a while then starts groaning until it stops. Anyone know how to drop the motor from behind the glovebox as will try the old WD40 trick.

Suddenly stopped working tonight no matter what speed it was set at. then suddenly kicked in enough to demist windscreen enough to get me home. Now stopped again. Any ideas what it may be. Can't be a fuse so guessing motor or is there a resistor faul.

My Scuttles are regularly checked and kept clear, no water ingress or anxiety about it. I have another issue and just checking that its now called BCM.