gathy

Cannot find item no, on my phone pal..

Nuts bolts glue

It has a 10mm lip round it and no fixing points etc ..yep it's not for the technically inempt or fainthearted but does look well when it's on..dear though for a piece of plastic imho.

Wait till there's 20% off pal for the rear diffuser and spoiler trim ..warning though you have to be brave to fit the rear diffuser as there is no fitting kit or mounting points etc..i had to pot rivet it on underneath and used self adhesive velcro on the top as not to damage my bumper if I ever wanted it off...my front splitter is off eBay 100 notes.(maxtondesigns)

Got mine off eBay pal 100 notes. Sellers is Maxton designs Bradford, great service too delivered in there car same day.

Its the plastics underneath tbh . my drives steep and scrapes the splitter massively in and out..we have them speed bumps that you can miss if you hit them right but underneath gets it with just me in . shockingly bad if I got rear passengers . yep going back to standard this week :(

if you can wait a week or two im taking mine off.. gutted really but im sick of bottoming out on my heavily speed-bumped estate and getting on and off my drive as i have a front splitter on too.. I can confirm these spring seriously drop you car and cannot get you hand in the front arch easily 30mm drop. there only a few month old and £50 notes will buy them. saying that ive just noticed yours is an estate so might be different part no.

I had a 2007 s40 20d sport se ..rubbish car,no storage drove horrid ,bad torque steer.really noisy. Poor remapping results from rica.based on ford focus with a French engine really noisy.scrubbed rear tyres like driving around with handbrake on.My wifes same year focus tdci lx is a miles better car too be honest with same engine.

Rang them apparently their back on sale shortly...mhhh Sent from my GT-I9195 using Tapatalk

Cheers just as I thought . many thanks Sent from my GT-I9195 using Tapatalk

Stick your head out the window you should hear the compressor clutch click into action when you press the button . If not you might have some gas but not enough to charge . It will not run if too low pal Sent from my GT-I9195 using Tapatalk

I have run out of things to do to my VRS and now the only thing i can think of which could do with a upgrade is the OEM speakers... I have a columbus fitted and anything over half on the volume causes the OEM speakers to max/crack out. I was hoping to fit 6/9s in rear shelf and a sub in boot all run off a amp The problem is does the columbus have RCA sockets on the rear or would i need to run a wire from the existing speakers in rear doors ..its been 20 years since i installed any amps etc and not savvy with the new ICE setups.

you got it yet ? ..they have not re-advertised them on ebay.

Not that bothered now it's £36 with postage :( also it's in the wrong section this and annoying me now..ha Sent from my GT-I9195 using Tapatalk

Pm me details. I will have it for the laugh £29.99 sounds better Sent from my GT-I9195 using Tapatalk

I'm itching. .whats it like without a induction kit ? Sent from my GT-I9195 using Tapatalk

Welcome to the P.i.club no regrets putting them on mine and sensible pricing to boot. Sent from my GT-I9195 using Tapatalk

No offence taken..Look ace on mk1 always thought mk2 body was too big for the chassis. Sent from my GT-I9195 using Tapatalk

Looks dafter with back wheels flush with arches and front tucked in. Sent from my GT-I9195 using Tapatalk

Can bus gateway issue? I retrofit mine and always get a can bus error microphone malfunction no matter what I do but everything works spot on with my columbus . a vdcs scan might help. Sent from my GT-I9195 using Tapatalk

Right I've trawled the depths of the forum and still scratching my head regarding front spacers for my FL I have standard wheels on and 15mm spacers on rear on lowering springs and im wanting to do the front . I gather through my research that 10mm is fine for the front but I cannot get any hubcentrics as my hub centre sticks out 12mm . I just don't know what to do its a right cafuffle . New wheels are not a option by the way. Any advice is much appreciated Sent from my GT-I9195 using Tapatalk

That will be wrong nuts used . I had a dimma 205 many years ago with 150mm spacers on each side held on with cylinder head bolts . They stayed on lol,although we are always replacing worn wheels on artics at work cause they fall off without spacers on. Sent from my GT-I9195 using Tapatalk