asterixmic

Hi there I am curious what were the symptoms to lead to replacement of engine mounts? I have 1.0 gasoline and sometimes at idle revs, I feel like an uneven vibration. It doesn't disappear when the engine is warmed up or if the AC is off or on

Hi So I understood from the previous replies that I should use fuse 43, the rear wiper for the ignition switched connection. But which one could I safely use as permanent live? Thanks

And as a followup question to my post above, can someone tell me which fuses can I use for: Permanent power Switched with ignition power? I have a parking mode Garmin camera. Lastly, can I use the bolts left/right of the fuse box as negative connection? Or is there a better alternative?

Hi I just installed the cable in the pillar trim next to the fuse box (left side for me). As the cable was slim enough, the hardest part was removing the trim panel. Pushing the trim towards the roof so that it can slide out it's not as easy as it sounds. That's because the trip fits quite snuggly at the bottom. I was also very careful in how I pulled as I didn't want to damage anything, not knowing what's behind with the airbag. Now after I did it the first time, I feel much more comfortable. Below you can find pictures with my installations. Hope it helps other people as it would have helped me if I would have had them :) How I did it: Detached a bit the top part, until the first metal claw of the clips. Basically you need to pull perpendicular until you get it over the resort part Then pull the trip towards the roof until the other clips is in the larger part of the hole Remove speaker cable and trim Run an insulated rigid copper cable (or any other cable pull helper) from next of the speaker cable to the bottom part of the fuse box. There's a lot of space to have an easy an tidy pul Pull back from the top the camera cable Fix with camera cable with slim cable ties, not over tightening (white in my pictures) to the main cable on the outside Run the camera cable under the headliner just by slightly pushing it under. Also under the mirror case You'll notice a picture with a broken clips. My car is second hand, I recently bought it. This clips was already damaged, possibly forced by a previous installation. Now I have to replace it https://www.skoda-parts.com/spare-part/8p0867276-spring-clip-skoda-32789.html

Is it ok to tell them that I have obdeleven and I saw the code?

Hello I recently (2 month ago) bought a second hand Scala 2022 with 39k km, 1 year warranty. Until now I has no issues, but yesterday I received a dashboard warning that Lane Assist is now working and has been deactivated. The warning sign disappeared soon after, like under a minute. Seeing that Lane Assist still did not work, I actually had to manually activate it in the Driver Assist menu. When I got to a full stop I connected with Obdeleven and found these 2 errors: B200FF0 in steering assistance B200FF0 is n driver assistance After a google search it seems that there has been an issue with the steering column that stopped the lane assistance. How worried should I be? Is there a known issue, something I could demand to be fixed under the warranty. Thanks