davojuri

Got it all Billy. THANKS

Shoping already. Thanks for info-nicer, ckeaner look

Forgot to mention USP Motorsport stainless steel Clutch 02J line for OE plastic slave cylunder, they also have it for metal VR6 slave cylinder http://uspmotorsports.com/product_info.php?products_id=466

Will it fit my 2001 octy?

I see. Tought he means some kind of upgrade. But This one looks Nice And Clean compared To My Okd,yellow one. Will take it Now cause I Have to Install 9 silicone Mishimoto Coolant Hoses. Tnx!

Can't find any. Help appreciated. Maybe a link or picture

Like its owner ;-)

Hi is that one on the front the same diameter as the old logo? I have bought 5JA 853 621 from Rapid and it is bigger than one I have in my front grille on 1U RS. Could you measure it? Maybe yours isno't the same in size as one I bought for Rapid-sow only Rapid with new logo, and now on forum also Octy, Fabia and Superbs. Going to put it on the rear but for the front had to take FK front grille, even I'd like to retain front mesh grile billy2981 did http://s537.beta.pho...koda 2013 Logo? http://s537.beta.pho...ry/Front grille help with dimenssions

Hi here is my from new Rapid http://s537.beta.photobucket.com/user/davojuri/library/New%20Skoda%202013%20Logo?

Here are my Devil eyes headlights which are curently being upgraded for bixenon projectors 6000K http://s537.beta.pho...ith Ring Bulbs?

being surgeon meens being detailed in anything ;-)

I replace great front grille done by billy2981 with FK chrome /black one. What do you think?? http://s537.beta.photobucket.com/user/davojuri/library/Front%20grille? Headlights are devile eyes ones and are currently being upgraded for bixenon projectors 6000K-pics to come

Here are pics of my S4 throttle upgrade: http://s537.beta.pho...m throttle body Bought TB 70mm from IE together with 70mm adapter. I boreed out my small and large port intake from 60 to 70mm to allow maximum flow throeuigh it. On the car for the moment small port head with transition adapter prior to definite upgrade to ported intake and ported adapte. Than will measure on the dyno difference between small and large port (using 034 phenolic transition spacer) to see if there is any difference. Up to 400hp small port should flow better and faster.

New S4 2.7T throttle body installation http://s537.beta.photobucket.com/user/davojuri/library/S4%2070mm%20throttle%20body?

Setrab 913 installation pics http://s537.beta.photobucket.com/user/davojuri/library/Setrab%20913%20oil%20cooler

New FK front grille http://s537.beta.photobucket.com/user/davojuri/library/Front%20grille?

In progress devil eyes headlamps are being upgraded with bixenon 6000K projectors http://s537.beta.photobucket.com/user/davojuri/library/New%20Devil%20eyes%20headlight%20with%20Ring%20Bulbs?

Updates in blue JBS K03 cast upgrade manifold double ceramic coated from inside and outside 42DraftDesign 3" modular race (decat) ceramic coated downpipe OE EGT probe from 225hp Miltek cat back resonated 2.5 inch system Denso Iridium IK 24 pregapped to 0,024" Hyperboost adj. DV Ecotek Emissions Control Valve CB26-P Blue Piperross Chrome Valve for CB26-P ECS Tuning Adjustable FPR 034 fuel pressure gauge 034motorsport Vortex breather kit ECS Silver Lightweight/Under Drive Pulley Set For 1.8T/2.0 Fluidampr Crank Pulley for Late 1.8T Engine Gates racing timing belt blue T306RB ARP crank bolt Air intake VDT www.modshack.com MAF Audi TT 225HP Air diffusor and 90mm air duct to air box 034 fuel pressure gauge HKS turbo timer www.rsrmotorsport.com new custom remap on MAHA LPS 3000 K04-001 turbo, Siemens Deka 440cc injectors Large port intake manifold 06A 133 223P 034motorsport Phenolic spacer with transition from large to small port head New South Performance large on the intake side and small port on the cylinder head side AGN smooth valve cover-polished Forge FMIC- FMSKOFMIC Forge TIP FMGOLFIND Forge Silicon Turbo Hose Kit 1.8T 180 FMKT005 Forge DV relocation kit 150/180hp 1.8T Forge Quickshifter 5spd FMVAG5QS Mishimoto Radiator Hose Kit MMHOSE-GLF-99BL Verdict Motorsport Shift Bracket Bushings 42DraftDesign Mk4 & Mk5 Shifter Cable Bushings Fitment Guide SFS performance custom TIP LCR (or Lamborghini Galardo) 4bar fuel pump sender unit 8L0919051H (thanks to your site I found perfect match without starvation problems that I had with 044), Neuspeed 1.8T 180 Degree Thermostat Neuspeed 180 Degree 3 Pole Fan Switch Neuspeed Connector Conversion Kit for 3 pole fan switch Neuspeed Front Anti-Roll Bar 25mm Neuspeed Rear Anti-Roll Bar 28mm Neuspeed Lower Strut Brace Billet APR carbon strut bar SPEC SV363F Skoda Octavia 1U 97-05 1.8T STAGE 3+ clutch SPEC SV21S Skoda Octavia 1U 97-05 1.8T STEEL FLYWHEEL D2racing Track racing coilovers Ground Control camber caster kit SPC Performance Camber and Toe Shims 71520 and 71530. Audi TT Sport Spindle Audi A4 75mm front bearings with two meqssure for inner diameter- can sustain greater axial pressure than OE 74mm ones-required custom work to be done LSD QUAIFE QDF10R 02J 6 speed custom made powder coated gearbox with Quaife LSD 1. 3.7; 2. 2.2; 3. 1.6; 4. 1.25; 5. 1.04; 6. 0.87; Final Drive 3.64 Audi TT bigger tier rods and tie rod ends (16mm thread) R32 cast control arms with bigger front bushing (OE upgrade) Powerflex front control arms bushings Superpro Front Control Arm Lower - Rear Bush SPF3397K-castor increasing POWERFLEX BUSH PFF85-505 R32 steering rack Powerflex bushing all around Zimmermann Formula 312mm drilled front discs, Zimmermann Formula 256mm drilled rear discs EBC yellow stuf front and rear pads-track tested by myself-great ones BHP (Brake Hose Production) braided brake hoses front and rear Mintex racing brake fluid, Castrol EDGE Sport 10W60 engie oil, Castrol TAF-X transmission oil, Setrab oil cooler 913 - 13 row Setrab mounting bracket for oil cooler - P/N 23-9002 Setrab 90 and 45 degree and straight one swivel hose 10AN fittings Mocal oil cooler mounting bobbins Mocal oil cooler sandwich plate+thermostat SP1T-POLISHED Black Sandwich Plate Adaptor For Oil Temp / Pressure Sensor 3/4 Filter rspec.co.uk Starlite nomex/kevlar oil lines AN10 blue FSB1000 Ina engineering Baffled Oil Sump: http://s537.photobuc...A Baffled Sump/ TWS 8x19 ET35 Falken 225/35/19 F452 Wheelspacers 5x100 6mm 12mm Painted in red and covered with clear lack rear lights, Dark grey perforated leather seats and door panel inserts, Qstarz BT818X 5Hz GPS reciever Devil eyes headlights-installed BiXenon projector lamps in existzingprojector position http://s537.photobuc...ith Ring Bulbs/ Bimarco Futura FIA approved bucket seat full leather BUCKET SEAT FITTING KIT. RACE, RALLY FIA SEAT. BOLTS Recaro seat subframe with rails-car specific RING H7 XENON ULTIMA 120% BRIGHTER HEADLIGHTS BULBS RING H7 XENON ULTIMA 120% BRIGHTER HEADLIGHTS BULBS RW127. LED repeaterts smoke Skoda Octavia (1U) Speedhut Revolution SST RED Shift Light Brand Custom paint work done: http://s537.photobuc...tom paint work/ Polished INA baffled sump, valve cover, boost pipe, catch tank, alternator, intake manifold and TB polished 3M NIMOC High Glossy Carbon black film-door handle, centre console inserts, air vents Global HPC green 20 window film NEW Throttle DV hose blue ALU straight 63mm joiner 76 to 63 straight adapter for S4 70mm Throttle body INA TB adapter plate 70m through Intake manifold port matched to 70mm

Hi I am in for that 100gbp price, as long as it excludes any additional custom duties, taxes etc. Normaly on ebay it is 110gbp delivered but with the risk of additional costs. Please let me know. Just bought their REAR LOWER BAR UR-RL2-1273

Did you bought that gfk parts from Germany and if yes how were they in quality especially in mounting precision??? Hope those Carbon parts will be resonable priced and made in same manner as those from Germany that had German TUV-meaning legal to install. T

Did you bought that gfk parts from Germany and if yes how were they in quality especially in mounting precision??? Hope those Carbon parts will be resonable priced and made in same manner as those from Germany that had German TUV-meaning legal to install. T

Hi I need part numbers for black floor trim, black plastics cover of all trim inside and black roof for Octavia 1U sedan. Trying to convert my hell inside trim RS to black-anthracite one Help please :D :D

Hi Westalic I am courious I you diud instal those parts?? If yes please pics, details, technical stuff-how does it fit, quality of production etc. Regards Davort

I was in Sparco EVO3 -to wide for me. Haven't got chance to sit in EVO2. Might be also good one. Narrov and taller.