Flyfisherman

Its the seals behind the steel insert which is behind the plastic door card - I renewed all mine and had no further issues whilst I had the vehicle. Have a read at the attached thread. Cheerrs Paul

Gang@ Briskoda I would just like to say thanks to all the people I have posted replies to my posting. I have traded in my Octy Vrs for another vehicle which I have been informed its going to an auction, I dont know which auction site but somebody will get a good car - 2006 Vrs with 30K miles, full service histroy etc. Always fancied one of these makes - so I have taken the plunge - bougth myself one - wait for it Alfa Romeo Guilia Super Sport 2.0 ltr petrol. All the best guys and gals Paul.

No overkill - I have cross drilled and grooved on my Vrs purchased from MTec brake - car pulls up better than the OEM brake. Paul

Can somebody advise which side of the car this plug is as there is nothing like this on the off side or am i looking in the wrong place Cheers paul

Thanks guys

Gang@ Briskoda Does anybody know the part no.s of the terminals that go into the snap lock connector on the rear of the dash cluster - there are two sizes. 1 is about 1/32" and the other about 1/16" - same size terminals are the heater controls + main lighting switch. Also could you advise where to purchase these terminals. Cheers paul

yes 11 days - thats a long time for Ed as he usually on teh forum most days answering posts - he gone awol.

I have contacted Ed but he has gone awol.

Has anybody any more info on doing this mod - I have a larger bottle with low level sensor, not fitted it yet. Pictures would be a great help Paul

I thinks its either fuse 9 or 19 in the engine bay fuse box its rated @ 15 amps Paul

Could be a coil pack https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwj5jK7Am-rZAhXiLcAKHUBkCVUQrAIIxAIoATAA&url=https%3A%2F%2Fwww.briskoda.net%2Fforums%2Ftopic%2F419461-octavia-mk2-vrs-ignition-coil-pack%2F&usg=AOvVaw15U2hfhd5Wh6YbuOaF0Oc7 Paul

Guys Has anybody sucessfully fitted face lift heater controls the ones without the digital readouts (2009 - 2013) to a pre face lift Vrs. Paul

All sorted - disconnected the radio this morning and plugged it back in and it worked - got sound, looks like i have poor connection on the plug that goes into the radio paul

Jon Have a look at these people https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjY09Oo0p7ZAhWpC8AKHRrZCq0QFggyMAA&url=https%3A%2F%2Fwww.mtecbrakes.com%2F&usg=AOvVaw3wCNPLokLr2O-rHlSRlWnT I have fitted grooved and dimpled to my Vrs and oh boy do they pull the vehicle up quickly, far superior to the OEM brakes. Paul

Guy Help need I have recently swapped my std clocks to maxidot clocks (thanks to eddie for doing the swap of data held within the clocks for me) and since fitment of these swapped clocks I have no sound coming from the speakers, initially the radio went into safe mode, purchased the code as I did not have it, now the radio comes on, CD will play and change disc etc - but I have no sound at all. Any ideas Paul