varooom

Might be an idea to get some images of what you have (system details) You can also check the firmware of the system by holding your Menu/Setup button for 10 seconds, look for something called "Software Train"

That image looks like you have not extracted the files

They will be different, look closer at the profiles 215/45 R18 the 2022 document 205/45 R18 the 2020 document

It was more about the SW base level really. Seems you are going to be ok to load this, so good luck.

@BloembolI will send this along now, do you know your current installed Software Train?

Show picture of the SD Card contents. Zero chance of getting USB to work.

Odds are the download is fine, so problem lies with media or PC in the extraction process.

You have a private message now with link, best of luck

Well we have the 1941 update we can send you along if you get no luck with the dealers, or don't wish to wait

I can send you an update by Private Message shortly

What version are you on, so we can expand the knowledge?

Yes I can send you the update you need

💯 @Felix2021 they log a lot of data. It was meant as a joke of course about applying update, as he is already booked in at dealers.

Be interesting feedback if it does help

You are welcome, could be a good idea to run the car to keep the power stable for when you flash it (I did on my car this way) I recommend that you do a bad sector scan on that SD Card before you try this again In an Admin command prompt, type in the follow (where X = SD Card - Change to your correct drive letter) CHKDSK X: /R

I already did... check your Private Message 🆙 top right

Yes as I am sure you have seen now in the thread, an update to 0308, then to 0324

Load the new 1941, and pull the suprised Pikachu face when they query where it came from. "Must have loaded from OTA..."

You have not killed it, you just cannot see correct fuse (I have laptop open now) Pull this mini 10Amp fuse, the 30Amp is on the right should be for the blower motor

Hopefully you worked out the fuse now @boardtc

Quick educated guess is 30Amp top right green. I would need to lookup to be 💯 %

Find radio fuse

2 things Start engine, run 2-3mins to put back more than enough charge Then whilst doing this, find fuse to pull for radio.

You have errors on your media. You need to get a new SD Card and try again.

I'm out of ideas