Loads of people on here running dif stuff and was just wondering what can be done WITHOUT any arch rolling/problems/issues etc etc etc

What offset are Fabs normally?

I wouldn't recommend alloys wider than 8J. I have 7.5J (VW oem) with 15mm spacers all round and they sit far enough out for me. Offset for furby alloys range from 35 to 45 I think. Stock vRS fabia alloys are ET35 I think.

My Compomotive TH's are 8J wide, IIRC they are ET25 so (just) sit level with the arch but thats with 205/45/16's giving a subtle stretch. I'm desperate to lower mine so the wheels actually fill the arches as it doesn't look quite right at standard height.

I wouldn't recommend alloys wider than 8J. I have 7.5J (VW oem) with 15mm spacers all round and they sit far enough out for me. Offset for furby alloys range from 35 to 45 I think. Stock vRS fabia alloys are ET35 I think.

THAT SOUNDS LIKE A CHALLENGE SIR!!!

haha gotta go find some 9J wheels now

Im running 8J 18's wheels but there are a few guys on here with 8.5J wheels.

like to see if 9J are possible!

i think stuart_hatch ran or runs 9's on his, although he's got rolled arches.

i'm running 8's but my spacers are too wide causing damage, i think with the right offset 8's will give no issues.

Stock alloys are ET37, I think I read that somewhere on here.