Looking at getting the bluetooth kit for my RNS 510

On ebay the guy says it is plug and play so I assume there is no wire cutting like in Stu's how to, will it require Vag Com coding or work straight out of the box.

I tried asking the guy but his English wasn't the best

Yes it will require coding and you will need someway of getting the wires into the back of the headunit.

All explained here on Stu's site. Octavia-vRS.com - OEM Integrated Bluetooth Telephone Install

I have looked at Stu's site but the installation is not for a RNS 510

The guy is offering the kit plug and play no wire cutting here

I assume the RNS 510 must have provision to install bluetooth without cutting into the loom

Thanks

When I originally had the bluetooth kit installed I had a MFD2 and subsequently changed to a Columbus/RNS 510/MFD3 whatever you wish to call it.

The install is the same for all.

Good luck with your choice.

Stu has updated the way he installs these, and takes the power from from fuse board now - however, either way no wires within the cars original loom need cutting!