Skip to content

help with windows

Featured Replies

Hope some-one can help with this.......all my errors have been sorted & cleared except these 2

Address 46 -------------------------------------------------------

Controller: 6Q0 959 433 C

Component: 0H Komfortgerát 0002

Coding: 00067

Shop #: WSC 13765

2 Faults Found:

00937 - Switch for Electric Window: Rear Left (E52)

27-00 - Implausible Signal

00938 - Switch for Electric Window: Rear Right (E54)

27-00 - Implausible Signal

End -------------------------------------------------------

I dont have elecy rear windows so how do I get rid of the above errors:confused:

Thanks

Edited by WazP

  • Author

Not many repies...Can no-one help ? :eek:

I want to remove errors by recoding the controller so it's not looking at rear switches.....Is this possible ?

I am a relative noob with vag com.......anyway some further info

Control Module Part Number: 6Q0 959 433 C

Component and/or Version: 0H Komfortgerát 0002

Software Coding: 00067

Additional Info: 6Q2959802 0H Tõrsteuer.FS TFK 3.1

Additional Info: 6Q2959801 0H Tõrsteuer.BF TFK 3.1 6Q2959801 0H Tõrsteuer.BF TFK

2 Faults Found:

00937 - Switch for Electric Window: Rear Left (E52)

27-00 - Implausible Signal

00938 - Switch for Electric Window: Rear Right (E54)

27-00 - Implausible Signal

Readiness: N/A

Any help would be appreciated.......Pleeeeaaasssse :thumbup:

Thanks

Warren

Not one I've seen before, but seems to be that the controller is carrying coding for a Fabia with 4x EW (likely to be Elegance coding as that was the only Fabia, in early revisions, to come with them).

Best I can suggest is to look at some coding from a normal Fabia with 2x EW and adapt the coding that way.

I'll see if I've got some '46' coding about anywhere for my old Fabia, and you can then compare it with yours.

Steve

Nope, sorry had a look and I don't have any coding to hand...

I can probably get you some, but would be a couple of weeks. Best to find someone with a Fabia and VCDS who can provide it.

Steve

  • Author
Not one I've seen before, but seems to be that the controller is carrying coding for a Fabia with 4x EW (likely to be Elegance coding as that was the only Fabia, in early revisions, to come with them).

Best I can suggest is to look at some coding from a normal Fabia with 2x EW and adapt the coding that way.

I'll see if I've got some '46' coding about anywhere for my old Fabia, and you can then compare it with yours.

Steve

I did have a problem when I 1st got the car with the drivers door window not working correctly (see one of my previous posts), whilst the stealers were repairing it they broke something on the passanger window......wondering if they didn't code it correctly?

elsawin says controllers are for 2 actuators,remote locking & sensor

Thanks for input :thumbup:

I'm pretty sure that'll be it; I was going to ask you if there'd be any change in coding previously.

You might be able to work it out within 46, with VCDS. Never needed to do anything with windows though, so not sure.

I see you're fairly local, you could come down to the monthly NW meet (1st Sun of each month) and there'll be someone there with VCDS.

Steve

The coding options are all listed in the relevant label file named 6Q0-959-433-. The coding part is below:

C00,Comfort System (J393) Coding

C01,00016 - Central Locking without Power Windows

C02,00064 - Central Locking with 2 Power Windows (Front)

C03,00256 - Central Locking with 4 power Windows (Front & Back)

C04,

C05,+00 - 2-Door with Selective (Single) Door Locking active

C06,+01 - Selective (Single) Door Locking inactive

C07,+02 - 4-Door

It would appear that your coding 00067 is correct, C02+C06+C07 (64+1+2) = 00067. Also your controller list is showing 3 door controllers, 1 right hand front and 2 left hand fronts - which is strange.

Usually when I come across Fabias that are showing faults with controllers that they don't have, I recode the Gateway (19) to exactly the same as it is, this forces a refresh of the controller installation list.

  • Author

It would appear that your coding 00067 is correct, C02+C06+C07 (64+1+2) = 00067. Also your controller list is showing 3 door controllers, 1 right hand front and 2 left hand fronts - which is strange.

Usually when I come across Fabias that are showing faults with controllers that they don't have, I recode the Gateway (19) to exactly the same as it is, this forces a refresh of the controller installation list.

I recoded 0067 in 46......how do i go about recoding gateway (19) to refresh the controller list :confused:

like i said earlier i am still learning :o

Many thanks

Warren

Glad you're making progress :thumbup:

Good info from fordfan :)

Steve

  • Author

Getting cheesed off now :mad:

Just scanned again after recoding gateway (19) to 00014 as it was before, cleared DTC's in 46 .....this is what I got:

controller 19

Control Module Part Number: 6N0909901 Component and/or Version: Gateway K<->CAN 1S29 Software Coding: 00014 Work Shop Code: WSC 13765

controller 46

Control Module Part Number: 6Q0 959 433 C Component and/or Version: 0H Komfortgerát 0002 Software Coding: 00067 Work Shop Code: WSC 13765 Additional Info: 6Q2959802 0H Tõrsteuer.FS TFK 3.1 Additional Info: 6Q2959801 0H Tõrsteuer.BF TFK 3.1 2 Faults Found: 00937 - Switch for Electric Window: Rear Left (E52) 27-00 - Implausible Signal 00938 - Switch for Electric Window: Rear Right (E54) 27-00 - Implausible Signal

Have got it so it shows only 2 controllers, but codes not clearing :confused:

Any more suggestions?

  • Author

I think the stealers have fitted the wrong door control units, have a look at attached file.

vag com 15-11.pdf

If they have would I be able to get it sorted under warranty....problem is the dealer who fitted them (Chapelhouse Wigan) have gone, (no bloody wonder :thumbdwn:) they fitted them under warranty?

I know its not a big issue but it is really p!ssing me off:orb_mad:

Thanks

vag com 15-11.txt

Edited by WazP
Ommited file

Ah of course! Yeah, looking at it the other way round! Just never occured to me that they'd manage to do that mind you :rolleyes:

When did you have them done under warranty? Because there should be 'warranty on the warranty work' if you get me? :)

Worth checking with another dealer - I'd recommend Simpsons in Preston, for your part of the world. - or their Colne branch who I've used personally.

Steve

Ah right, cool - or not cool, as there's no come back really, now that time has passed...

Proper controllers from a Fabia at a scrappers is about all I can think of now :(

Steve

If it's any help here are a couple of scans from Y plate Fabias:

19 and 46 from a model with 4 electric windows:

-------------------------------------------------------------------------------

Address 19: CAN Gateway Labels: 6N0-909-901.lbl

Part No: 6N0 909 901

Component: Gateway K<->CAN 1S30

Coding: 00014

Shop #: WSC 13765

No fault code found.

-------------------------------------------------------------------------------

Address 46: Central Conv. Labels: 6Q0-959-433.lbl

Part No: 6Q0 959 433 E

Component: 34 Komfortgerát 0002

Coding: 00258

Shop #: WSC 04940

Part No: 6Q2959802

Component: Tõrsteuer.FS TFK 0002

Part No: 6Q2959801

Component: 0J Tõrsteuer.BF TFK 0002

Part No: 6Q0959811

Component: 0J Tõrsteuer.HL TFK 0002

Part No: 6Q0959812

Component: 0J Tõrsteuer.HR TFK 0002

No fault code found.

End ---------------------------------------------------------------------

19 and 46 from a model with 2 electric windows:

-------------------------------------

Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl

Part No: 6N0 909 901

Component: Gateway K<->CAN 1S30

Coding: 00014

Shop #: WSC 13765

No fault code found.

-------------------------------------------------------------------------------

Address 46: Central Conv. Labels: 6Q0-959-433.lbl

Part No: 6Q0 959 433 A

Component: 0D Komfortgerát 0002

Coding: 00067

Shop #: WSC 13765

Part No: 6Q2959802

Component: 0D Tõrsteuer.FS TFK 0002

Part No: 6Q2959801

Component: 0D Tõrsteuer.BF TFK 0002

No fault code found.

End ---------------------------------------------------------------------

Have you tried disconnecting the battery to reboot the convenience system?

  • Author

Thanks Fordfan your scan of the 2 window fabia is simaliar to my scan but the TFK matches (controller =02, and door units =02)

on mine the controller is 02 but the door units are 3.1.......would this make a difference?

Have you tried disconnecting the battery to reboot the convenience system?

Will try later....keep you posted.....even though I'm not optimistic :(

Loads of thanks for help tho' much appreciated

  • Author

Right !! up date time

Disconnected battery (for abour 2hrs) as per Fordfans idea......Didn't work :(

Cleared DTC's in 46 (yet again), recoded 19 to same as before....switched off ignition

restarted vag-com checked 46.....hey presto they were still there...tried clear DTC's & got this:

Control Module Part Number: 6Q0 959 433 C

Component and/or Version: 0H Komfortgerát 0002

Software Coding: 00067

Additional Info: 6Q 2959802 0H Tõrsteuer.FS TFK 3.1

Additional Info: 6Q 2959801 0H Tõrsteuer.BF TFK 3.1

No Faults Found

or DTCs not supported by controller

a communication error ocurred

Readiness: N/A

WTF :confused:......I think I may have to take it stealers:devil: and pay money:eek::scared:

Before I do that has any techs go any ideas :o

Thanks

Warren

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.