I have this fault code pending

P0103 Mass or Volume Air Flow Circ High Input

Is this just due to the Super Low temps ? & my car being able to suck in more air than the Airflow can register due to the Hybrid Turbo ?. The Airflow Meter is a genuine Bosch & only a few months Old ...

Could the Above be the cause of this ?

http://briskoda.net/forums/topic/151122-rev-limiter-fabia-vrs/

Although i would not of thought so, Seeing as it was a pending Fault ..

Cheers.

Dean

Sometimes over revving can bring up an Engine Management light but I doubt above problem is to do with that. Although in future i'd change up a bit quicker if you don't want anything to pop

Sometimes over revving can bring up an Engine Management light but I doubt above problem is to do with that. Although in future i'd change up a bit quicker if you don't want anything to pop

I normally do .. But the Turbo Dynamics MD446 Turbo Revs so rapidly, Coupled with this cold weather.. I just thought that i would clear a bit of Soot out of the Engine Officer

Cheers.

Dean

Edited 1 February, 201016 yr by dfullb

Have a look at http://wiki.ross-tech.com/index.php/16487/P0103/000259 - it's probably nothing. Clear the fault and see if it re-appears. But if you feel the car's running well then it's probably just a blip. You could also do some logging, as the article suggests.

Steve