3" Cat-bacl Exhaust

[Mustafa]

Hi. Is there any 3" catback exhaust system avaible for Fabia?

Im running custom 2,5" exhaust and I will be running GT30r with 3" downpipe, so Im looking for 3" full catback exhaust.

Any Idea?

My car thread

[Johnny50]

Probably not for what you need !

Custom made is what you'd be best with for a 1.8T in your Fabia.

[BigW]

I think most of the diesel varieties tend to use 2.5" also, I think it'd be a case of getting a custom exhaust manufactured.

Both the blueflame and Miltek are 2.5 :(

[Mustafa]

and what about 2,75" catback. its 70mm i think. Is there any. I know some people here, which are runniing GT2559v or GT2260v are running this size. It would be better than 2,5"...

[BigW]

Yes possibly on an octavia but not off the shelf to suit the fabia body AFAIK :wonder:

Worth checking on http://www.seatcupra.net and see if any ibizas with the 20vT exhausts are available, thats the same platform so you may get a better match.

[Wardy]

Good call about the Beezas. Probably the most popular aftermarket audience for this sort of thing, especially with the power some are running. Polo GTi 9N3 too, with the 1.8T - but a much smaller number.

What sort of power are you aiming for? I would wonder about the requirement for a system as large as 3", and issues of exhaust back pressure.

Steve

[Johnny50]

Out of interest what size are people like Des and Steevie running ?

[Wardy]

Des was running a 3" - looked like a large section of scaffolding!

[Sy.]

Pipewerx would have made one for you but just seen your location

[Mustafa]

if there is no official 3" I will have to make some custom for my aplication. I will be running GT3071r 82A/R and expecting 280-300hp without internals on some "safe" pressure. Ill push it to max (hope for 450hp) when my engine will be forged

Edited 19 February, 2010 by Mustafa