Will this fit

[gaz130]

Will a mk4 golf Steering Column surround fit the mk1 as looking at getting one of these for my turbo gauge or even the passat ones:

http://www.newsouthperformance.com/Mk4pod.htm

Edited 18 August, 2010 by gaz130

[Oet]

apparently yes with some modification

[TissMe]

Will a mk4 golf Steering Column surround fit the mk1 as looking at getting one of these for my turbo gauge or even the passat ones:

http://www.newsouthperformance.com/Mk4pod.htm

Hi Gaz

Yes it does , as has been said , not specific , but has been known to fit the Octy , also the Fabia too

Sarah

[rk696]

Hasn't Rob Clubley got one?

[gaz130]

Did a quick search with no luck how do mod it to fit.

[TissMe]

Did a quick search with no luck how do mod it to fit.

Patience

Sarah

[countryboyhaha]

Have one in my garage. Am going to be fitting it soon. Bough it nodded. It's the single overlay one me thinks.

[rk696]

There's a bit here Rob's Site

[gaz130]

Noticed awesome also stock these so if its an easy mod might bob down to get on as local to them.

[TissMe]

Noticed awesome also stock these so if its an easy mod might bob down to get on as local to them.

Thought you knew that?

Sat Hi to them from me , Mike has a new mug....tell him to fill one for you LOL

Sarah

[Lloyd55vrs]

doesnt awesome actually list thses for the octy anyway somewhere on their site

[Bodge]

I've had one of these fitted for a couple of years now. Sarah may remember selling me the kit with the gauge and all the bits....

No modding required. I just cleaned the burrs off the plastic edges, and used sticky back velcro strips to stick it on. Looks very neat and tidy, and you don't even notice it.

Here is my original thread, with loads of fitted photos on the second page: http://briskoda.net/forums/topic/109425-newsouth-columnpod/page__hl__newsouth%20pod

Never makes any noises, and never rubs on the back of the steering wheel.

[gaz130]

I've had one of these fitted for a couple of years now. Sarah may remember selling me the kit with the gauge and all the bits....

No modding required. I just cleaned the burrs off the plastic edges, and used sticky back velcro strips to stick it on. Looks very neat and tidy, and you don't even notice it.

Here is my original thread, with loads of fitted photos on the second page: http://briskoda.net/forums/topic/109425-newsouth-columnpod/page__hl__newsouth%20pod

Never makes any noises, and never rubs on the back of the steering wheel.

Thanks for that did you get the full cowl one or the other.

[Steevie Wonder]

I've had the twin gauge pod fitted for a while now and prior to that the single one for over 3 years with no problems at all!! A good piece of kit with a nice oem look about it.

Steve

[Pot Of jam]

I have the cover one, its going to need some serious modding before it fits. As theres a good 10mm before the coloum and pod meet.