New speed sensor and brake switch, cruise still not working

[Rob_OctaviavRS]

Just fitted a new VSS and brakelight switch, lights and speedo working correctly, but cruise control still won't set, do all the previous fault codes need to be reset before it will allow the cruise to be set?

Also fitted a new N75f valve and my god what a difference, no surging and picks up tons quicker, peaks at around 20-21psi and holds 14-16psi ( not sure how accurate the gauge is but its transformed the car.)

[2SkodaFamily]

Can you tell whether or not the ecu is seeing the signal from the new brake switch? Are the brake lights working?

Or did you break the new switch fitting it?

[trundlenut]

try clearing the codes and then see if any come back.

[rwbaldwin]

What about the clutch switch?

[Rob_OctaviavRS]

Can you tell whether or not the ecu is seeing the signal from the new brake switch? Are the brake lights working?

Or did you break the new switch fitting it?

Brakelights work fine, didn't break the switch, not tried the clutch switch, fault codes were brake switch and speed sensor.