Hello I need to take the hub off and have a look my ABS , had it up to the vag machine and it says it the sensor ? cant be because iv put a brand new one in and it sill the same, wots the scocket size to take the locking nut off , please and thankyou

why in general and off-topic? Would be better to put this thread in the forum which matches your car. What car is it?

why in general and off-topic? Would be better to put this thread in the forum which matches your car. What car is it?

why in general and off-topic? Would be better to put this thread in the forum which matches your car. What car is it?

Have no replys !

Need to know what model car, whether front or rear.

Would have thought removal of wheel, would define what spanner or otherwise is needed

for it's removal.

What warning did you have to change sensor in the first place.

What was the ownership of the VAG tester told you the new and old sensor was at fault.

For what it may cost get car along to Skoda and get them to verify your findings and fix.

Maybe more expensive but much more a reliable source with a guarantee of work.

Electrics now-a-days are so much more complex, and one thing wrong can upset another that is innocent.

Have no replys !

My balls are golden not crystal.

My balls are golden not crystal.

(skoda fabia vrs 06) It the front off side and no i will not take my car to skoda , its the hub that i will take off and CLEAN , yes i will replace the looking nut, wen i find the fault , looks like i will have to keep tryin scocket sizes for now!

Why are you removing the hub to check/clean the abs sensor? have you replaced the correct side that vag com told you? it could be a faulty sensor or the connector or wiring loom could be faulty/damaged.

(skoda fabia vrs 06) It the front off side and no i will not take my car to skoda , its the hub that i will take off and CLEAN , yes i will replace the looking nut, wen i find the fault , looks like i will have to keep tryin scocket sizes for now!

If you replaced the sensor and can't remember that there is no need to remove the hub

and now you have forgotten what sized socket you used ?? you are a silly billy??

If you replaced the sensor and can't remember that there is no need to remove the hub

and now you have forgotten what sized socket you used ?? you are a silly billy??

i have not removed the hub , i have replaced the senser this turnd of the abs lights and stopd the brake from juddering then 6 months later same prob , vag says it the senser ?

Edited 17 February, 201115 yr by SQUARE