hi all

i was gonna buy one of these: http://cgi.ebay.co.uk/USB-OBD-II-Diagnostic-Cable-Lead-409-1-KKL-VAG-COM-/350441039517?pt=UK_Diagnostic_Tools_Equipment&hash=item5197e9e69d

is this the right one for a 2000 1.3 mpi, and where exactly is the connector for it?- Haynes manual doesnt seem to mention it-

thanks in advance

Should do the trick, I think.

The connector is on the right-hand side of the dashboard, underneath it, right by the driver's door. You need to be low to the ground to see it, looking up (it's 'behind' the grey plastic of the dashboard, as it were - i.e. towards the front of the car from there)

yeah that will work, although i've had a few problems in the past with cheapo ebay cables, the hood of the plug is sometimes a little bit too long and it prevents the connector from mating fully into the socket, i ended up removing my connector from it's shroud to ease the problems... you could also just file down the hood of the plug a bit it you have any problems

yeah that will work, although i've had a few problems in the past with cheapo ebay cables, the hood of the plug is sometimes a little bit too long and it prevents the connector from mating fully into the socket, i ended up removing my connector from it's shroud to ease the problems... you could also just file down the hood of the plug a bit it you have any problems

excellent- many thanks- i'll order it straight away-