I need to remove my rear bumper from a 2007 Roomster. I have located 2 x torx top of bumper, 3 x torx each side under wheel arch, 2 x plastic clips under bumper. All removed easily. It seems the only fixings left are at the very outer edge of the bumper on the upper side where it meets the rear panels on either side. It is not clear how these are removed without breaking the plastic or damaging paintwork.

Any help would be good.

Thanks

Scottie

Hi Scottie,

Elsawin shows (in addition to the fixings you've already mentioned) another of the plastic expanding rivets in each of the wheelarches, above the three torx bolts. Looks like it's these that are holding you back.

Yep, they go upwards right at the very edge of the bumper.