Current List below

JDJnr - OEM minus Green - 80mm x 2

hounded - Retro - Yellow on black - 55mm x 4

Steve_Birdie - 2011 Badge - 88mm x 1, 80mm x 1 and 70mm x 4 (updated)

VRS Nick - Retro metallic red on silver - 80mm x2

VRS Mike - (the one I pm'd you about) 80mm x2

Sauf - OEM minus green - 1x80mm 1x88mm

heaven88 - Retro - Orange on black - 1x80mm 1x88mm

Coops - 2011 Badge - 90mm x 2, 88mm x 1, 80mm x 1

Bodie - 2011 Badge - 88mm x1, 92mm x1 (MKI Superb)

vrsrs - VRS logo on black - 55mm x 4

truespartan - OEM minus green - 80mm x 2

Big Lee - OEM Minus Green 2x80mm 4x55mm

civiji - 2011 Badge - 90mm x 2

Bohica - 2011 Badge 90 mm x 1 & 110 x 1

JDJnr - OEM minus Green - 80mm x 2

hounded - Retro - Yellow on black - 55mm x 4

Steve_Birdie - 2011 Badge - 88mm x 1, 80mm x 1 and 70mm x 4 (updated)

VRS Nick - Retro metallic red on silver - 80mm x2

VRS Mike - (the one I pm'd you about) 80mm x2

Sauf - OEM minus green - 1x80mm 1x88mm

heaven88 - Retro - Orange on black - 1x80mm 1x88mm

Coops - 2011 Badge - 90mm x 2, 88mm x 1, 80mm x 1

Bodie - 2011 Badge - 88mm x1, 92mm x1 (MKI Superb)

vrsrs - VRS logo on black - 55mm x 4

truespartan - OEM minus green - 80mm x 2

Big Lee - OEM Minus Green 2x80mm 4x55mm

civiji - 2011 Badge - 90mm x 2

Mad_man_moss - retro 2 x 80mm. VRS logo on black 4 x 55mm

Please could I order a retro one please.

also Are there any for steering wheels? as I am going to be getting a mk4 golf 3 spoke leather steering wheel at some point, but want to cover the vw badge with a skoda logo.

JDJnr - OEM minus Green - 80mm x 2

hounded - Retro - Yellow on black - 55mm x 4

Steve_Birdie - 2011 Badge - 88mm x 1, 80mm x 1 and 70mm x 4 (updated)

VRS Nick - Retro metallic red on silver - 80mm x2

VRS Mike - (the one I pm'd you about) 80mm x2

Sauf - OEM minus green - 1x80mm 1x88mm

heaven88 - Retro - Orange on black - 1x80mm 1x88mm

Coops - 2011 Badge - 90mm x 2, 88mm x 1, 80mm x 1

Bodie - 2011 Badge - 88mm x1, 92mm x1 (MKI Superb)

vrsrs - VRS logo on black - 55mm x 4

truespartan - OEM minus green - 80mm x 2

Big Lee - OEM Minus Green 2x80mm 4x55mm

civiji - 2011 Badge - 90mm x 2

Mad_man_moss - retro 2 x 80mm. VRS logo on black 4 x 55mm

grr666 - oem minus green- 2x 80mm

Also Are there any for steering wheels? as I am going to be getting a mk4 golf 3 spoke leather steering wheel at some point, but want to cover the vw badge with a skoda logo.

yes the badges can be shrunk down in size to be used on steering wheel in the same way as on the alloys

although you'll need to confirrm final sizing as i've sold everything from 40mm up to 55mm for steering wheels

JDJnr - OEM minus Green - 80mm x 2

hounded - Retro - Yellow on black - 55mm x 4

Steve_Birdie - 2011 Badge - 88mm x 1, 80mm x 1 and 70mm x 4 (updated)

VRS Nick - Retro metallic red on silver - 80mm x2

VRS Mike - (the one I pm'd you about) 80mm x2

Sauf - OEM minus green - 1x80mm 1x88mm

heaven88 - Retro - Orange on black - 1x80mm 1x88mm

Coops - 2011 Badge - 90mm x 2, 88mm x 1, 80mm x 1

Bodie - 2011 Badge - 88mm x1, 92mm x1 (MKI Superb)

vrsrs - VRS logo on black - 55mm x 4

truespartan - OEM minus green - 80mm x 2

Big Lee - OEM Minus Green 2x80mm 4x55mm

civiji - 2011 Badge - 90mm x 2

Mad_man_moss - retro 2 x 80mm. VRS logo on black 4 x 55mm

andytdi - retro - 1x 80mm + steering wheel

grr666 - oem minus green- 2x 80mm

hi, do you do a auto bot badge to fit a mk1 octavia in white background and black face?? cheers, ben

hi, do you do a auto bot badge to fit a mk1 octavia in white background and black face?? cheers, ben

All badges are customer made to order so yes a black autobot on a white background would be possible

All badges are customer made to order so yes a black autobot on a white background would be possible

ahh right nice 1 how much are they for front and rear?? cheers, ben

on a production of their own they'd be £10 each

if part of the GB they will be less than that

please can you put me down for a front and rear autobot for a octavia mk1 with black background and white autobot

cheers, ben

JDJnr - OEM minus Green - 80mm x 2

hounded - Retro - Yellow on black - 55mm x 4

Steve_Birdie - 2011 Badge - 88mm x 1, 80mm x 1 and 70mm x 4 (updated)

VRS Nick - Retro metallic red on silver - 80mm x2

VRS Mike - (the one I pm'd you about) 80mm x2

Sauf - OEM minus green - 1x80mm 1x88mm

heaven88 - Retro - Orange on black - 1x80mm 1x88mm

Coops - 2011 Badge - 90mm x 2, 88mm x 1, 80mm x 1

Bodie - 2011 Badge - 88mm x1, 92mm x1 (MKI Superb)

vrsrs - VRS logo on black - 55mm x 4

truespartan - OEM minus green - 80mm x 2

Big Lee - OEM Minus Green 2x80mm 4x55mm

civiji - 2011 Badge - 90mm x 2

Mad_man_moss - retro 2 x 80mm. VRS logo on black 4 x 55mm

andytdi - retro - 1x 80mm + steering wheel

grr666 - oem minus green- 2x 80mm

benbenvarey - Autobot - black on white - 80mm x 2

Can I be a pain can I change my centre caps to vrs logo on carbon???

can i have the black VRS logo for back and front of my Fabia vrs please. how much for a set of alloy wheel ones aswell as i have spiders on the way. cheers

Can I be a pain can I change my centre caps to vrs logo on carbon???

can i have the black VRS logo for back and front of my Fabia vrs please. how much for a set of alloy wheel ones aswell as i have spiders on the way. cheers

Guys you can have whatever you need

just update the list or add to the list

alloy centres are normally £6 each but again that should come down due to the GB discount

Can anyone help me with this? ...just a wee question and i know im making hard work of this but just how exactly do you take the badges off the front grille? On looking at it im not sure if the whole thing comes off or there is a plate behind it to attach the new one to it! There also appears to be two pins in what looks like a base plate....pic attached...I know everyone says aye sure its easy but then theyve probably done it before!!..

any help would be greatly appreciated...by the way its an FL RS

Cheers

Kit

any help would be greatly appreciated

Seriously kit just grow a pair

I can only speak from a Fabia 1 point-of-view but i simply shoved a Tesco club card behind my badge and sawed the badge free of it's adhesive foam padding.

I was then left with the mess shown in this post

I had to put my OEM badge back on hence the rough finish to everythign in that post but you can just peel off the left over adhesive padding, clean the area and stick my badge in it's place (as also shown roughly in that post)

The you see pins don't actually attach the badge to anything they are just used for siting.

JDJnr - OEM minus Green - 80mm x 2

hounded - Retro - Yellow on black - 55mm x 4

Steve_Birdie - 2011 Badge - 88mm x 1, 80mm x 1 and 70mm x 4 (updated)

VRS Nick - Retro metallic red on silver - 80mm x2

VRS Mike - (the one I pm'd you about) 80mm x2

Sauf - OEM minus green - 1x80mm 1x88mm

heaven88 - Retro - Orange on black - 1x80mm 1x88mm

Coops - 2011 Badge - 90mm x 2, 88mm x 1, 80mm x 1

Bodie - 2011 Badge - 88mm x1, 92mm x1 (MKI Superb)

vrsrs - VRS logo on black - 55mm x 4

truespartan - OEM minus green - 80mm x 2

Big Lee - OEM Minus Green 2x80mm 4x55mm

civiji - 2011 Badge - 90mm x 2

Mad_man_moss - retro 2 x 80mm. VRS logo on black 4 x 55mm

andytdi - retro - 1x 80mm + steering wheel

grr666 - oem minus green- 2x 80mm

benbenvarey - Autobot - black on white - 80mm x 2

laaban - OEM minus green - The lot: bonnet/boot (2x92 mm) 8 wheels (8x55 mm) and steering wheel (1x44 mm) Suberb II

If someone has experience with sizes on Superb II, please correct my measures above. Steering wheel is 3-spoke.

I already have a big pair!!..its what has got me this far in life!! ...just ripping the fecker off without asking how its held on is what we would have called the 7P's...those with a military background will know what all the P's stand for!!

Just dont want to feck it up when just a wee bit of help wouldve prevented it.

Cheers

Kit

Pastyboy could you please check your PMs

I already have a big pair!!..its what has got me this far in life!! ...just ripping the fecker off without asking how its held on is what we would have called the 7P's...those with a military background will know what all the P's stand for!!

Just dont want to feck it up when just a wee bit of help wouldve prevented it.

Yeah i'm just messin - love to see pictures once you're done. These could be the best most welel thought out fitment ever :p

Pastyboy could you please check your PMs

Done - nothing new there

Thought i'd add the photos of my new badge I received from Pastyboy as some of you guys who don't venture into the Fabia thread won't have seen it.

I am really chuffed with it, couldn't wait for a group buy as too impatient

Have still to fit the rear, but really like the front end now.

Thanks again mate,

Cliff you might end seeing pics of the world worst badge removal feck up!!...but Prolfe has kindly told me how its held on so il give it a bash

K:)

JDJnr - OEM minus Green - 80mm x 2

hounded - Retro - Yellow on black - 55mm x 4

VRS Nick - Retro metallic red on silver - 80mm x2

VRS Mike - (the one I pm'd you about) 80mm x2

Sauf - OEM minus green - 1x80mm 1x88mm

heaven88 - Retro - Orange on black - 1x80mm 1x88mm

Coops - 2011 Badge - 90mm x 2, 88mm x 1, 80mm x 1

Bodie - 2011 Badge - 88mm x1, 92mm x1 (MKI Superb)

vrsrs - VRS logo on black - 55mm x 4

truespartan - OEM minus green - 80mm x 2

Big Lee - OEM Minus Green 2x80mm 4x55mm

civiji - 2011 Badge - 90mm x 2

Mad_man_moss - retro 2 x 80mm. VRS logo on black 4 x 55mm

andytdi - retro - 1x 80mm + steering wheel

grr666 - oem minus green- 2x 80mm

benbenvarey - Autobot - black on white - 80mm x 2

laaban - OEM minus green - The lot: bonnet/boot (2x92 mm) 8 wheels (8x55 mm) and steering wheel (1x44 mm) Suberb II

Steve_Birdie - 2011 Badge - 88mm x 1, 80mm x 1, 70mm x 4 and 40mm x 1

Edited 16 June, 201114 yr by Steve_Birdie

JDJnr - OEM minus Green - 80mm x 2

hounded - Retro - Yellow on black - 55mm x 4

VRS Nick - Retro metallic red on silver - 80mm x2

VRS Mike - (the one I pm'd you about) 80mm x2

Sauf - OEM minus green - 1x80mm 1x88mm

heaven88 - Retro - Orange on black - 1x80mm 1x88mm

Coops - 2011 Badge - 90mm x 2, 88mm x 1, 80mm x 1

Bodie - 2011 Badge - 88mm x1, 92mm x1 (MKI Superb)

vrsrs - VRS logo on black - 55mm x 4

truespartan - OEM minus green - 80mm x 2

Big Lee - OEM Minus Green 2x80mm 4x55mm

civiji - 2011 Badge - 90mm x 2

Mad_man_moss - retro smoked? like above on fabia 2 x 80mm. retro on carbon 4 x 55mm

andytdi - retro - 1x 80mm + steering wheel

grr666 - oem minus green- 2x 80mm

benbenvarey - Autobot - black on white - 80mm x 2

laaban - OEM minus green - The lot: bonnet/boot (2x92 mm) 8 wheels (8x55 mm) and steering wheel (1x44 mm) Suberb II

Steve_Birdie - 2011 Badge - 88mm x 1, 80mm x 1, 70mm x 4 and 40mm x 1

Yeah i'm just messin - love to see pictures once you're done. These could be the best most welel thought out fitment ever :p

Done - nothing new there

New message sent