Ive had some superpro wishbone bushes sitting around for a while, Im on with fitting the rear bushes and as I opened them ages ago ive managed to loose the installation instructions, Im just wondering which way up does the bush go? It looks nearly the same both ways? Ive done the front bushes, just need rears in now Any help appreciated

Are they the same bush as the cast wishbone bushs use, just without the offset hole or are they a bush you fit one bit into top and other into bottom and put metal spacer in

I thought the lower wishbone rear bushes were the same on either side of the bush (1 piece bush), and that only the rear beam bushes had a specific way to be fitted. I'm prepared to be corrected though, since it was a while back I fitted mine. I really wouldn't have thought it mattered though, since the arms are identical, and instead of being a mirror image of each other, they are just the same arm turned upside down.

Unless of course you do have the castor correction bushes which are for the aluminium TT wishbones...which I know nothing about whatsoever.

These are one piece bushes, they arnt the castor adjustment ones just to fit std vrs wishbones. They do look symetrical but read somewhere someone fitted them upside down? Maybe was powerflex id seen? Just wanting to make sure as i dont want to take them back out once they are in