These are just a few Pictures to show the car off. some parts in the pictures are not available.

Front Bumper and Bonet grill

R32 Golf seats

Aero Wipers and the bay

PLEASE READ THESE POINTS!

Parts marked as + Postage are available to be posted, please dont ask for postage if it doesnt say

All Parts can be Collected from Cardiff

Any Part I can fit in my little Fabia I will deliver for a fee

Delivery cost must be payed first and a date arranged.

Cash on Collection or payment via Pay Pal. Fees must be payed by the buyer.

(either Gift or personal payment so you can pay the fees. Any payment I receive that incures fees will be refunded asap and an email sent asking to try again)

First come first served

NO "Dibs" unless a 50% none refundable deposit is payed via Pay Pal

Please read the listing and be sure to go through the sold section. Any parts not listed feel free to pm me and ask as this is all from memory and I could of missed some parts out.

Please dont ask for parts that are listed to go with other items as I wont split or render anything u/s.

Lastly, If interested in parts please PM me with the parts you want as the subject so I can find each PM easily to reduce delay.

Payments to [email protected]

MODS:

Exterior:

Custom Made Bonnet Grill - Black met Outer for Black cars. Std Chrome ring. Slats cut out of rear section and Mesh bonded in to the Chrome surround and moulded to shape. Skoda badge and vRS badges in OE locations.

£ 62 + £9.50 postage (due to packaging)

Rear black vRS bumper - Comes newly fitted with Milotec Diffusor in ABS plastic (to match the rub strip) and comes with factory fit Reverse sensors and loom. Cant split the diffusor as its bonded on and I had to trim round the cut out for the zorst

£ 150

Front Black vRS bumper - Comes with newly fitted Milotec grills (grills still not out the packaging but brackets bonded on) and a nearly new LCR splitter. few stone marks but nothing major. looks like pics above. Cant split the grills as the brakcets are on the bumper!

£ 180 without LCR splitter £220 with LCR splitter (LCR splitter is not for sale on its own, Ill be keeping it for my Fabia if it comes off the Bumper)

Handling:

KW v3 Coilovers - These are NEW and never used, rears have only been fitted but never any weight put on them.

http://www.lkperform...87?carId=123575

Comes with:

New OEM LCR top mounts and bearings

New nut and bolts for the front Hubs

Top cups

Rear top mounts

Rear Spring rubbers

all you need is the rear shock nuts and bolts. Pritty much ready to fit. Complete kit with all tools and booklet.

£ 1100 + £35

TT, LCR, R32 and S3 Cast Wishbones - Used in good nic wioth 10k old std solid bushes and Ball joints. all parts are OEM from TPS. Ill include the used nuts and bolts too as they are only a few years old now but were only on the car for less than a year so are pritty good.

£ 90 + £12.65

Wheels:

18" Leon Cupra R Ronal's - Set of 4. Fresh refurb by the AlloyWheelSpecialists in Cwmbran. Powder Coated in Sports Silver.

7.5j 18 et38. Fitted with Falken 452 tyres (225 45 18) with pleanty of life left in them. They have not been used since the refurb earlier in the year.

£ 650 + £36 postage

+£18 to inc NEW OEM Skoda centers

£23 posted for just the centres

Engine:

3" Decat Downpipe - 2 parts, fits the K03 turbo. the Decat pipe goes from 3" to 2.25" iirc the same as the std vRS exhaust system so youll need to add a longer section to match it to your aftermarket cat back. Brand NEW, DP is wrapped in heat tape.

£ 98.65 posted

4 Bar FPR - Ideal upgrade if your going stage 2+, some mappers reccomend one.

£ 28.50 posted

AET stage 2 Hybrid K03s Turbo - Ported exhaust housing. No play in shaft and spins feely. 2 of the 3 Mani to Housing bolt hols are helicoiled but that is no problem. Has not been used to full potential yet and has not been used much. Intake is 40mm same as a std K03/s turbo so your std intake will fit, so too will the Neuspeed intake hence why I was going to use this one on my car.

£ 520 + £24 postage

BAM 380cc Injectors - Used but good order, these are a must for a hybrid setup

£ 80 + £5.50 postage

NEW Bosch 3" MAF - seal on box only broke to see it was the correct item and not a std AUQ engine MAF. NEVER used and wrapped back up and put away ready for my hybrid plans but never got that far.

£ 86 posted

2.5" Turbo Back Exhaust - This is a one piece full system, CUSTOM MADE. It is a ProSpeed 2.5" DP with a 200 cel CAT and Longlife 2.5" cat back system. This is staying as one part till the buyer comes to see it. Either take as one whole unit or decide where you want it cutting fo ease of fitting on to your car. Whole system cost over £700 and has been fine tuned over the years so it doesnt catch on anything and still doesnt hang low like the Miltec and other off the shelf items.

Gives a nice tickover warbble and sounds great when pushing on. NOT too loud but nice and sporty.

£ 300

Engine:

1.8T AUQ Engine - Done 112k NO smoke or abnormal noises. (mint well looked after NEVER ragged or pushed hard. always fully warmed up, mostly Motorway miles Going to and from work while a civi or home for the weekends when I was a soldier)

Comes with:

Bare Engine (£400)

MAF (£28 posted)

std TIP (will go with turbo)

K03s Turbo in good order (£172 posted)

Boost Pipes to Intercooler (NO IC included will need to get one)

Std 710n DV(2 years old) (£12 posted)

N75 Valve (2 years old) (£11 posted)

Throttle Body (£44 posted)

Intake Mani + Fuel Rail, 317cc Injectors and 3bar FPR (£49 posted)

Denso Plugs(2 years old 25k max) (£25 posted)

New Coil Packs x 4 (£58 posted, £16.50 each posted)

G60 SMF + Sachs clutch kit (Sold)

Wiring loom to ECU (staying on engine)

ECU remapped with RS Tuning Custom Remap (£200 posted) will need recoding to your immo or an immo delete.

Oil Pickup Pipe was replaced at 101k and tbh didnt need it as old one was clean as a whistle.

Engine is on Longlife service and has been serviced before needed/Indicated with genuine OEM parts and oil from TPS.

£ 600

SOLD:

CAI + Filter

Neuspeed style TIP

SuperPRO dogbone mount

TT Hubs

Cast wishbones + Castor Bushes

R32 Steering rack

R32 PAS pump

R32 Subframe

S3 Lower brace

R32 steering wheel

Neuspeed 26mm FARB

ABD 32mm RARB + Beam

Forge DV + Spring

S3 Upper Brace

Wing Mirrors

APR Dogbone

Gearbox

Clutch

LCR Brembos

CR Turbos Hybrid Kit

mk4 Golf Aero Wipers

B&M short shifter

SuperPRO Castor Bushes

R32 Seats

Forge Brace

Not Available:

Forge FMIC

Thanks for looking

Billy

How much for the alloys mate

Looks like to nicer car to break its Gawjus

What exhaust system is on it, and how much (assuming aftermarket) ?

Same question on the fmic

Cai price?

Edited.

Lots of stuff to list guys so please bare with me.

Cant really do it on my phone.

sorry guys, not got time atm to fully sort the thread.

will be fully doing it Tues night and wed as I am off work.

cheers

:( was hoping the brakes wouldnt come off yet :(

Gutted :(

I'll take it all and pay you £10 a week for forever lmao

definately interested in the wheels mate pm me with a price

MOD thread done,

Engine will be in a listing of its own as its gonna be complete with everything inc looms and locks and dials so it can be used as a conversion.

std Parts will be in another thread too.

Pmd

Replied.

terms changed guys.

all really good stuff and all worth while mods

CAI SOLD

Cai, neuspeed style tip, superpro dogbone mount all sold. First poat will be updated when on pc.

Posted too sorry for delay

updated.

Do you have standard brakes?

No mate sorry they are on my fabia.

updated

now inc std parts.

more sood

Updated,

Make me offers guys, I am feeling rather festive for some reason?

Sensible offers all considered.

My car doesnt deserve your brakes !!!

It could be on the classifieds

Gotta work things out tonight

Festive discounts is it mate ?

Does the upper rear strut brace fit the fabia vrs?

Yup mate its for the fabia but fits both.

Yup mate its for the fabia but fits both.

Do you have the wing mirrors to sell?