Hi Guys

I've had a read but can't find a definitive answer.

When fitting the Cupra console bushes do they have a specific orientation or do I just need to fit them with the flats of the hex at the 12 and 6 o'clock positions.

Then from photos it appears that the side of the bush where the rubber it flat to the edge of the metal, goes towards the rear of the console,

with the face where the rubber is set back from the front going towards the front. (Hope that makes sense)

Thanks for any replies, just really don't want to get this wrong.

This is the guide I used mate: http://www.seatcupra...ad.php?t=306624

EDIT: This is the photo of the bush replaced:

Edited 26 March, 201313 yr by jordy_wd

Thats how I thought it was, more confidence to do it now thanks