Scout owners with hill-hold

[Retze]

Have planned to get hill-hold to my MY08 4x4 TDI PD so does anyone know correct abs control unit that i should have/change to activate it?

Have read something about some sensor that control unit should have but dont know more so if someone could tell me more???

[trundlenut]

You need to know the part number of the abs controller to work out if it is possible.

Sent from my Nexus 4 using Tapatalk

[Retze]

Has anyone had it just coding it?

[trundlenut]

Mine is a MY07 and the abs controller can't do it.

Sent from my Nexus 4 using Tapatalk

[Retze]

If i get my abs control unit number, were i can check that does it got all thst is needed to add hill hold?

[trundlenut]

There is a list I've seen somewhere, I'll try and find the link to it later.

Sent from my Nexus 4 using Tapatalk

[Huskoda]

I had a 2008 4x4 and it didn't have the right controller. I looked in to it, but it was too expensive just for that.

 

This is the unit I had: http://www.autotav.com/ABS-ESP-Hydraulic-unit-VW-1K0-614-517-AB-1K0-907-379-AB-Ate-10020602244-10096003613

 

They used to list the one that did support it, but I see its not there now. If your part is on that list, you cant activate hill hold, though.

[Anddenton]

This is the ABS module in my 2008 Scout which does have hill hold:

 

Address 03: ABS Brakes        Labels: 1K0-614-517-MK60-A.lbl
   Part No SW: 1K0 614 517 AD    HW: 1K0 614 517 AD
   Component: ESP 4MOTION MK60-AT 0102 
   Revision: 00H14001   
   Coding: 0023170
   Shop #: WSC 73430 790 00000
   VCID: 69DDFA074062C3B

No fault code found.

[trundlenut]

Have a look at this thread for a list of modules with and without HHC etc.  I have a feeling I had found another list, but I can't find it at the moment.

[Retze]

Thanks for eweryone. Finded out that my unit is 1K0 614 517 AB so cant activate hill hold for that. Trying to find cheap unit that i could activate it.