Hello All, 

 

So I have the below error on my Octavia VRS MkIII, i have cleared the code on numerous occasions however it always comes back.

 

The only change I made was on 55-Headlight Range byte 6, i changed 00 static cornering light inactive/not installed to 04 static cornering light according to SAE J582.

 

Original long coding: 03DE02003F000000

Coding after change: 03DE02003F000400

 

Once this was changed i got the warning message on the dash so changed the byte back to 00 static cornering light inactive/ no installed and cleared the fault.

 

The fault just comes back straight away.

 

Any help will be greatly appreciated.

 

 

 

             Address 55: Xenon Range       Labels: 7P6-907-357.clb

Control Module Part Number: 7P6 907 357 A    HW: 7P6 907 357 A

  Component and/or Version: AFS-ECU       H07 0080

           Software Coding: 03DE02003F000000

            Work Shop Code: WSC 73430 790 00063

              ASAM Dataset: EV_HeadlRegulVWAFSMQB 001120 (SK37)

                      VCID: 3D7704EAACF446F6B01-8068

1 Fault Found:

 

5275220 - Headlight 

          C107E 54 [137] - Missing Calibration / Basic Setting

          MIL ON - Confirmed - Tested Since Memory Clear

             Freeze Frame:

                    Fault Status: 00000001

                    Fault Priority: 1

                    Fault Frequency: 1

                    Reset counter: 128

                    Mileage: 9104 km

                    Date: 2014.06.22

                    Time: 10:55:10

 

 

Is there anything else ticked in byte6?

 

Sometimes “00” is a mask hiding the true coding,

if nothing else is ticked (check the binary code is also all zero’s as well) then it is unlikely to be a mask.

All zeros in byte 6 so nothing hidden nothing else ticked. 

Don't know how but I managed I clear the fault and it hasn't come back.

Think it's time to stop experimenting with VCDS

Whenever you make a coding change on mk3 in module 55 xenon range you will always get this error - its normal

You then just need to do a basic setting adaptation to recalibrate them - the fault will disappear and all will return to normal.

It's in basic settings:

Step 1 - basic headlight setting

Step 2 - Aknowleged basic setting

Hi Guys,

 

Did anyone manage to get a vcds security code for module 55 Headlight range basic settings? I'm struggling with coding the new control unit (car crash and unit replaces) and i need to reset to basic settings. When i hover over the code it doesn't show me the code as it does on the other mofules...     Octavia VRS 2014