I'm wanting to check the oil pressure on my Vrs after the rebuild just to make 100% sure everything is tip top!

I've done an engine flush before removing the top end to try and clean everything up, I've even removed the sump to clean it out and clean the strainer, was all pretty spotless to start with anyway!

....back on track, anyone checked oil oressure on a Vrs before? What readings should I be getting?

I've got a gauge in mine,I see 75psi cold idle,23psi normal temp at idle,lowest I've seen with oil temps at circa 140c after track session at combe was 18psi at idle

Cool, thanks for the reply