Evening all,

 

As I understand it the Octavia 2 FL VRS has LED DRL's as standard.  I've just installed LED DRL's on my L&K, it works fine except for the bulb failure warning.  Is there any way in VCDS to disable the bulb failure or re-learn the resistance on the DRL's?

 

Many thanks

 

Dave

 

 

Wednesday,29,October,2014,18:51:01:43776
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.3.0 (x64)
Data version: 20140905


VIN: TMBFE61Z9A*******   License Plate:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 1Z (1K0)
Scan: 01 02 03 08 09 10 15 16 17 19 25 36 42 44 46 52 55 56 62 72
          77

VIN: TMBFE61Z9A2065494   

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
36-Seat Mem. Drvr -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Xenon Range -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
77-Telephone -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels: 1K0-937-08x-09.clb
   Part No SW: 1K0 937 087 D    HW: 1K0 937 087 D
   Component: BCM PQ35  H   103 0573  
   Revision: 00103 AF    
   Coding: 4E180AB8F85BB1C040080080310091E4437800AE637D85605C0540000000
   Shop #: WSC 73430 790 00999
   VCID: 326E86B76D84618E5D9-8067

   Subsystem 1 - Part No: 1Z2 955 119 C  Labels: 1KX-955-119.CLB
   Component: Wischer 17110  22  0601
   Coding: 00D7B7

   Subsystem 2 - Part No: 1K0 955 559 AH  Labels: 1K0-955-559-AG.CLB
   Component: RLS 161109 05  54  0402
   Coding: 0730ED

   Subsystem 3 - Part No: 1Z0 951 171
   Component: Innenraumuebe  008 5101

   Subsystem 4 - Part No: 1K8 951 605
   Component: LIN BACKUP HO  H10 9003

2 Faults Found:
02745 - Bulb for Daytime Running Light; Left
            010 - Open or Short to Plus
             Freeze Frame:
                    Fault Status: 01101010
                    Fault Priority: 2
                    Fault Frequency: 5
                    Reset counter: 85
                    Mileage: 51990 km
                    Time Indication: 0
                    Date: 2053.14.02
                    Time: 18:27:57

             Freeze Frame:
                        Term 15 On
                    Voltage: 12.35 V
                        ON
                        ON
                        Term 50 Off
                        OFF
                        OFF

02746 - Bulb for Daytime Running Light; Right
            010 - Open or Short to Plus
             Freeze Frame:
                    Fault Status: 01101010
                    Fault Priority: 2
                    Fault Frequency: 5
                    Reset counter: 85
                    Mileage: 51990 km
                    Time Indication: 0
                    Date: 2053.14.02
                    Time: 18:27:57

             Freeze Frame:
                        Term 15 On
                    Voltage: 12.35 V
                        ON
                        ON
                        Term 50 Off
                        OFF
                        OFF


-------------------------------------------------------------------------------

None that I'm aware of at the moment. The only option I see mentioned is to use resistors to fool the bulb check. I'm more than happy to be wrong though!

 

I asked this on the rosstech forums recently but there hasn't been a response yet: http://forums.ross-tech.com/showthread.php?1508-LED-DRL-s-MY12-Octavia-bulb-check

+1 to above. You can buy in line resistors or DRL bulbs with them built in.

Sent from my SM-N9005 using Tapatalk

Thanks for your replys. 

 

Yes, I've been following that post hoping for a resolution :-D

Adding resistors is probably the easy option but it does seem a bit of a hack...

 

Thanks

 

Dave