Trunk button - plug'n'play in a O2 FL 2011?

[Alam]

http://www.aliexpress.com/store/product/VW-Skoda-Octavia-trunk-switch-car-boot-switch-button-with-cable/933853_1614598254.html

 

check this link it shows one of the wires has to go in pin 13

[radders567]

Let us know how you get on. Why do do a write up on the fitting?

[NinjaVRS]

How u get boot to open buy it self like that mine just pops open but stays shut

Sent from my SM-G920F using Tapatalk

[radders567]

Have a look at my video at the top of the thread

Sent from my D6603 using Tapatalk

[NinjaVRS]

Yh see it but is there a how to do this mod and where u get parts from

Sent from my SM-G920F using Tapatalk

[radders567]

Exactly that. Would love to see a how to on this.

Sent from my D6603 using Tapatalk

[NinjaVRS]

Where u get the springs from on the rear struts

Sent from my SM-G920F using Tapatalk

[radders567]

Bearingboys. They are Laguna struts

Sent from my D6603 using Tapatalk

[Alam]

Its a mod by installing industrial springs on boot hydraulic lifters.....

[Alam]

What if we could straight away wire this switch with the boot switch. It should work and more over it will only pop up by pressing the unlock button on the centre console first and then pressing this button.... which means nothing would happen in the moving car if its pressed accidentally untill unless unlock button is pressed......

[1991luk]

I hate it when people solve the issue but do not share the result.

[Syracusa]

O2FL:
There is no possibility to use the door controller, because no dedicated input on the controller for the trunk release button.
Connect the switch circuit to the J519 (black connector, pin 13) as a parasite (this is the original trunk realase button input pin, so there is a brown/red wire) and the other end of the switch circuit just connect to the GND. The button illumination is the same as the ESR or TPMS buttons.