Hi. Recently I just happened to notice that my seats have lost memory and I cannot store memory to them also. The adjustments work fine all way around but when I press any one of the three settings I had stored, nothing happens. I am also unable to set a new memory. No tone.

 

Checked infotainment unit to see if i can check seat memory with key, unable to highlight that option too.

 

I have a 1.8Tsi Octavia III

Some videos might be a help ?  https://www.youtube.com/watch?v=O8ZIEvDEOsA     

Thats whats not working now. Earlier those functions existed. Now the seats are adjustable but i cannot store them into memory.

Here is the vcds error code I received.

 

36-Seat Mem. Drvr -- Status: Malfunction 0010

 

Address 36: Seat Mem. Drvr (J810)       Labels: None
   Part No SW: 5Q0 959 760 A    HW: 5Q0 959 760 A
   Component: Sitzmemory    H06 0009  
   Serial number: Y0006NL410067
   Coding: 001400000000000001A081808080000000008181000000D4
   Shop #: WSC 73430 031 00063
   ASAM Dataset: EV_SeatMemorDriveSide 001015
   ROD: EV_SeatMemorDriveSide.rod
   VCID: 3B75D167B2907BC6811-806E

2 Faults Found:
9655380 - Motor for Seat Height Adjustment
          B1354 54 [009] - Missing Calibration / Basic Setting
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 29
                    Mileage: 1072 km
                    Date: 2015.04.18
                    Time: 12:14:39

10489856 - No Basic Setting
          B2010 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 7
                    Fault Frequency: 1
                    Reset counter: 29
                    Mileage: 1072 km
                    Date: 2015.04.18
                    Time: 12:14:39

Edited 22 April, 201511 yr by kjolly

Cleared it. Got it running again. Went to basic settings and clicked norming. Probably what it means is reset. Seat moved all the way front and then back with the up and down and then gave 7 faults with respect to all motor callibrations. Hit clear fault codes. And did a rescan. No more errors. Unplugged vcds, switched off car, loced, unlocked and re did the steps to scan for codes all over again. Memory seats are back and work ok. No more fault codes.