finally had darksides hardpipes made how the should have been, i know you're all going to say they state they won't fit cars with xenons but surely they should have fitted without having to put the fuel filter pot in the boot! well after a little modification they now fit spot on why they don't make them like this i don't know and everyone with xenons could buy them then and give them even more money. (JOKE) my fabricator is going to see if he can make a few sets of these up and they will be decent prices not ds prices! £200 posted   

 

the welds abit crap on mine as all he had was 2.4mm welding wire but if enough interest he said he would get what ds use being 1.6mm

 

Is this for a FMIC, or standards set up.

FMIC

sent from my Galaxy Note 4

Your car used to be Red!!

I had to have my Darkside pipes modified to clear the drivers side headlight rear civer and I don't have factory xenons! I think I had one of the earlier kits that wasn't quite the right shape!

Mine cleared OK but I have the Depo Xenon projectors so they look the same on the back as normal.

 

I did have a little oddity on the top connection to the intercooler - A sort of offset join when it should have been straight I think, but the silicone joiner took the slack OK and had no boost leaks despite 40PSI of boost.

tbh the pipes supplied were very poor think the jig slipped or welder had a bad day for that money i'd expect to get the fuel pot holder in atleast and their attitude towards what i was trying to tell them was don't buy from us again. so hey i won't 

To get mine to fit they took the grinder to the backing plate on my brand new Depo Xenons!

And there was a hole in one of the welds

And then the turbo shat oil everywhere.

The rest of the work they did was okay though.

I use Dirty Torque now. They are a lot better!

These for a seat sport fmic? And will these fit cars with factory xenons?

yes they will be made for cars for factory xenon's im in talks with fabricator now has to be a min of 10 though 

Isn't the kit "generic" in that it's meant for Polo-Ibiza/Fabia? In which case I can see that there might be restrictions.

 

J.

the kits i'll be having made will be listed for fabia only as they will be made and tested on my vehicle with XENONS

When will these be put in to production.

soon as I got 10 names

Have you got a group buy going on id be Interested.

How many names are there now.

Depends on price I suppose

still looking in to it atm price would be £200 all in with samaco and jubilee clips delivered anywhere uk mainland

Let us know how you get on, my pipes are starting to wear so will be looking a replacement in the not so distant future.

With silicone hoses and clamps I'd be intrested