I just wanted to get access to the speakers in the doors as the plastic in the panel in vibrating. The speakers themselves aren't too bad but I need to put some anti vibration in the door panel.

I can't find a good guide on taking the panel off. Where are the bolts etc? (I know the ones at the bottom of the door)

Thanks!

Two or three small ones at the bottom of the door.

Three big Philips head screws when you remove the window switch and arm rest bit.

Sometimes one behind the wing mirror adjuster but removed mine the other day and didn't have one.

Take the ones out the bottom, pop the small plastic cover in front of the interior pull handle as one lurks behind there, then pop both panels where the window switch is and there are 3 big gold ones in there. Then pull carefully all the way round the edges as they are on with plastic poppers. That's it. 

Stupid question but how do you take off the window switch? Cheers!

Thumbs to prise the plastic mount apart then it will pop out

Stupid question but how do you take off the window switch? Cheers!

If you mean the window switch panel, there is a small hole underneath you use a long think screwdriver to release the holding tab, don't force it as it will break and you will be annoyed until you source a new one.

Shows you how in the workshop manual which you should find using the search

If you don't have a long enough driver for that pop the side off then you can reach through with a finger or screwdriver. push the clip nearest to the door and it will come out.

Got it all off thanks guys.