Xman gtb17/60 help

I got the above turbo from xman fitted it and it just won't make boost... It's fitted to my ibiza cupra tdi.

If I set it up as xman man tells me to, so 16ingh until to make it hit the stop screw I get about 55% duty and I think the stop screw was about 96 difference.

I've had a map from John with increased fuelling and it did make it better, by a very small amount.

With John's advice I've also shortened the actuator and put on another map which I'm not sure how it was different to the other he provided.

I'm now at 68% duty and 84mbar on the stop screw.

I've maybe 1 thread remaining on the stop screw and an already very short actuator! Everything I read says to shorten the stop screw, xman advises to lengthen it.

I'm making 0.5 bar at 2k when I should be at 1.5 bar.

I'm not on a pc so please bare with my pics.

Does anyone have any advice? I'm at my wits end! I'm supposed to be driving this car to Scotland in a few days too!

Thanks

STOP SCREW

DUTY