Hi Aki78. I jumped from 0435 to 0490 so did not get to try 0475 (Thanks for the link though) I thought the dealer would update to 0475 not 0490.

Not sure what you mean by:

'random input selecting'

But-

I do not use a memory card other than the mapping. I assume you mean for music?

I often received 'source not available' message on media, relating to my USB stick, this needed to be removed and replaced in order for the Amundsen to see it. Then of course all my play settings were lost which was a real pain.

I have only driven it a few miles since the update so too early to tell if my problems have gone, although the dealer did say they could not guarantee the update would correct any of the problems! Not much confidence there then!!

 

Sorry for my english.

Random input selecting means that sometimes my Amundsen fails to continue the last track I listened on my SD card or pendrive.

When this happens the HU tends to switch to a different source (CD or radio).

This issue happens only when I start the car, otherwise everything is fine.

It's not a media card problem for sure, I tried 4 different USB stick and 2 different SD card so far. All genuine and error free.

I think there is a fair possibility that the file is hashed and the source if the leak could be traced.

We need 2 different source then to prove this.

Sorry for my english.

Random input selecting means that sometimes my Amundsen fails to continue the last track I listened on my SD card or pendrive.

When this happens the HU tends to switch to a different source (CD or radio).

This issue happens only when I start the car, otherwise everything is fine.

It's not a media card problem for sure, I tried 4 different USB stick and 2 different SD card so far. All genuine and error free.

No need to apologize I assure you, your English is better than some I know!!

My Media seems to continue where it left off, on starting the car Media continues the same track that was playing when I turned off the car. But I have noticed that once the car is started the track starts playing for about 20 seconds then stops for around 5 seconds then plays fine.

 

On occasion when the HU had lost my USB it reverted to radio or phone Bluetooth.

 

I need to find some time to go through the menus of 0490 and see whats there, Somewhere on the forum I think you said the later updates had a clear screen (Better for for reversing camera) instead of black, is that correct or was I dreaming?

My only issue with 0475 (also had with 0435 and 0465):

- random input selecting

- memory card error message

- source not available message

Only happens when I start the car, once or twice a week.

Ajw1100: did you have such problems and did the new FW solved it.

 

Somebody pleeease try and get hold of the new FW...

I tried multiple sources (including a friend of my friend who works for a dealer) with no luck.

hi guys, late comer here

 

 

is this update is still live, any chance of a PM this way?

 

thanks aki78 in advanced.

Hi,

 

Please could you PM me the update details for the Bolero?  Does this update improve the sound quality at all?  And why do the dealers deny there is an update available?

 

Thank you very much in advance!

 

is this really old?

 

or relatively upto date?

Hi, please send me how to update Bolero MIB1. Thank you!

Aki78 could you pm me too please?

 

Many thanks in advance

 

Celso

Noticed that since the update to 490 that when reverse engaged media no longer quietens as it did previously, cannot find a menu for it either to re-engage it.

Noticed that since the update to 490 that when reverse engaged media no longer quietens as it did previously, cannot find a menu for it either to re-engage it.

 

That might be a good thing, because there is a bug with the sound quality and it sometimes losing the low frequencies, that I am suspecting is connected to that audio lowering function...

Noticed that since the update to 490 that when reverse engaged media no longer quietens as it did previously, cannot find a menu for it either to re-engage it.

 

Have you tried (from memory) setup --> sound --> audio lowering?

 

I appreciate, having said that, that the 490 update may have got rid of the menu item altogether.

 

Might try to be a bit more forceful with my dealer re software update, given your experience. When I dropped it in for the last service I got him to write down on the sheet "head unit laggy, may need software update".

 

When I picked the car up they said "nah, nothing wrong with it." So I drove off, with the map autozoom behaving like the cameraman on a Channel 4 documentary, and the satnav trying to get me to drive directly into the sea. Same old same old.

Have you tried (from memory) setup --> sound --> audio lowering?

 

I appreciate, having said that, that the 490 update may have got rid of the menu item altogether.

 

Might try to be a bit more forceful with my dealer re software update, given your experience. When I dropped it in for the last service I got him to write down on the sheet "head unit laggy, may need software update".

 

When I picked the car up they said "nah, nothing wrong with it." So I drove off, with the map autozoom behaving like the cameraman on a Channel 4 documentary, and the satnav trying to get me to drive directly into the sea. Same old same old.

 

 

 

Thanks, I'll have another look tomorrow. probably missed it it the menus....

Edited 17 November, 20169 yr by ajw1100

Ohps, found it! Odd thing was it was set to 'medium' so set to 'strong' and tried that and thought I'd set it to Mute! Went back to Medium and tried again, this time it worked as it did before the update.

Version 0490 is now available for Briskoda members.

If you are interested please PM your gmail address (instead of posting your request here).

Please don't upload it to file sharing sites but feel free to share it with others.

Updating went fine, it was only 22 minutes from 0475 with my Amundsen.

The update archive is the same for MIB1 Bolero and Amundsen.

Edited 18 November, 20169 yr by aki78

And something new for columbus?

And something new for columbus?

I was wondering the same. My newish vRS has hw version 050, sw version 0315. Either they have different a different numbering scheme for Columbus or my system is very old for some reason.

I have columbus 40 days old octavia.

HW H50

SW 0702

Edited 20 November, 20169 yr by Ferdinand01

Guys, keep it in topic and this only applies to MIB1 devices - meaning that were manufactured before June 2015.

For anything after that there are no known leaks.

I have already done the update to 490 too and it seems to be better than 475 - this time I do feel it more responsive and the sound quality seems to have slightly improved. Could all be placebo, of course...

Hello , i have mib1 soft 0421. Can you give the update? . Thx

Hello , i have Bolero mib1 soft 0421. Can you give the update? . Thx

hello,

 

Can Someone send me the Update 0490 for MIB1 please?

 

Thanks

Hello,

please send me the Update 0490 for MIB1 too 

 

Thanks

your inbox is full it seems aki78

 

is it possible you could link me the new update as well  please mate

 

Cheers in advance 

Please PM me the link for bolero

 

Thanks in advance