HELP ! Twindoor wiring .... or NOT

[Tall_Tim]

Good Afternoon

I have a 2010 Superb twindoor elegance dsg

 

I have an intermittent issue with the boot mechanism. it intermittently works.

 

I have replaced the wiring loom 3 times and the boot switch once does anyone else have any other ideas?

 

How far back in the headlining is the connection to the boot?  Am I missing something?

 

Please help this is just so annoying

 

Cheers

 

T

 

 

 

[Tech1e]

There isn't a connection for the boot loom, it's part of the main harness.

[Tall_Tim]

Cheers anything else that may cause the boot to not be pulled close

[Tech1e]

There are a multitude of sensors and switches. Need to have a look in the data blocks using VCDS to see if anything is out of spec.

[Tall_Tim]

00380 special vehicle control module J608 no signal no communication

[Tall_Tim]

So the software can make the latch rise from an attached computer but not lower. Would there be a software update from Skoda that would effect the boot control module / ecu special control module

[silver1011]

A scan with VCDS will be more accurate. Try to find a member close to you...

 

http://www.briskoda.net/forums/topic/262215-list-of-vcds-owners-previously-known-as-vag-com/

 

The Ross Tech website does not list fault code 00380...

 

http://wiki.ross-tech.com/wiki/index.php/Category:Fault_Codes