I've bought myself Monte Carlo tail lights and front fog lights and was going to fit them today.

 

The instructions in the manual to change the fog light bulb state that you use the little round tool in the spare wheel thingy.

 

I tried inserting it where the diagram stated but it doesn't seem to do anything. I can't find a clip or anything that this will unhook to remove the surround to get to the fog light screws themselves.

 

Has anyone changed their fog light bulbs and is there something that you need to do that the manual doesn't specify?

 

 

There are three clips and you should gently unclip them one by one while pulling out with your hand. See this pic to understand where exactly you need to insert the tool: http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/aV8AAOSwqfNXjkhp/$_1.JPG

Cool

 

I managed to work it out - the manual tells you to insert the tool into the hole at the top but that doesn't seem to do anything. Inserting it in the middle hole and then pulling it releases it and lets you unclip the other clips easily