Single mass flywheel and clutch help!

[treboryelwor]

Hi All,

 

About ten years ago, shortly after buying WRC 97, i bought a single mass flywheel and clutch kit from Awesome GTI and fitted it.....

 

100,000 miles and 10 years later and she is showing signs of being a little thin in the clutch area, slightly high biting point and a little slippy if I provoke it....

 

I have a vague recollection of it being a corrado VR6 or G60 clutch kit (not sure if these are the same clutch but assume it is a clutch from and O2A gearbox). I have tried to confirm this with Awesome GTI, but they have not real knowledge as they don't stock it any more....

 

Can anyone shed any light before i order a clutch, strip the car one sunday and find it is wrong....

 

Thank you in advance.

[treboryelwor]

Went for a VR6 corrado clutch. Here's hoping it is right!

[Dean]

Added all the part numbers too.

[treboryelwor]

Great stuff. Thanks Dean! Will check part numbers before i strip mine down.

[treboryelwor]

Yup was corrado VR6 clutch kit. Bought a Sachs. Numbers were not an exact match but it fitted fine and works well. Thanks for the post Dean.

[Dean]

17 hours ago, treboryelwor said:

Yup was corrado VR6 clutch kit. Bought a Sachs. Numbers were not an exact match but it fitted fine and works well. Thanks for the post Dean.

If you got time it might be worth adding the number here I can get the my other post updated too!