Hi,

anyone knows what this is about?

 

VCDS Auto-scan output:

934149 - Rain/light recognition sensor 
          B1366 76 [008] - Wrong mounting position
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 4
                    Reset counter: 126
                    Mileage: 272226 km
                    Date: 2019.12.12
                    Time: 18:08:17

@aposhtol I am getting exactly the same error. AFAIK, the previous owner replaced the windscreen. Could you resolve the issue? 

Does anyone else know what could be wrong? I have cleared the code many times, but it keeps coming back 😢

1 Fault Found:
934149 - Rain/Light Recognition Sensor 
          B1366 76 [008] - Wrong mounting position
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 4
                    Reset counter: 232
                    Mileage: 102444 km
                    Date: 2021.07.03
                    Time: 16:53:15

 

Edited 6 November, 20214 yr by Vahids

The sensor sits on a special sealant/gasket that if it's incorrectly applied and gets air bubbles in the sealant/gasket it throws the sensor calibration out

Thanks @nige8021 Do you think it could b e resolved by replacing the gel pad like this:

https://www.ebay.co.uk/itm/233667293629?hash=item3667a7f1bd:g:0fsAAOSwZJdevnVo

3 hours ago, Vahids said:

Thanks @nige8021 Do you think it could b e resolved by replacing the gel pad like this:

https://www.ebay.co.uk/itm/233667293629?hash=item3667a7f1bd:g:0fsAAOSwZJdevnVo

If it's the same as this https://skoda.7zap.com/en/cz/octavia/oct/2013-753/9/955-955000/#18 #18 ? then it should be OK