I can't seem to find the genuine top trim stereo cover. I was wondering if this would fit?

https://www.ebay.co.uk/itm/Autoleads-DFP-20-02-Skoda-Fabia-MK1-03-06-Double-Din-Black-Facia-Fascia-Plate/202179052630?hash=item2f12cf8456:g:4kEAAOSwLjxaU2u4

Unable to get hold of the part anymore. even from a dealer. go onto the facebook page.. theres someone called danny clarkson who 3d prints them!

2 hours ago, DexxAllen said:

Unable to get hold of the part anymore. even from a dealer. go onto the facebook page.. theres someone called danny clarkson who 3d prints them!

Annoying that, you got a link to his profile? don't know which one it is.

https://www.facebook.com/danny.clarkson.9

18 minutes ago, duck said:

https://www.facebook.com/danny.clarkson.9

Cheers, i'll send him a message.

I believe there are some OEM ones for sale on this eBay link:

https://www.ebay.co.uk/itm/Skoda-Fabia-MK1-Radio-Cover-Top-Fascia-dashboard-VRS-DIN-Surround-Adapter/154006072318?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Ordered one myself, will let you know when it arrives.

 

I bought the one you linked and I couldn't get it to fit. The position of the clips looks like it is expecting the entire inner cage to be removed (aside from the bit on the left, which is where the optional cupholder would go). It looks like you need a full kit with a replacement cage to use the one you linked.

6 hours ago, richard_56 said:

I believe there are some OEM ones for sale on this eBay link:

https://www.ebay.co.uk/itm/Skoda-Fabia-MK1-Radio-Cover-Top-Fascia-dashboard-VRS-DIN-Surround-Adapter/154006072318?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Ordered one myself, will let you know when it arrives.

 

I bought the one you linked and I couldn't get it to fit. The position of the clips looks like it is expecting the entire inner cage to be removed (aside from the bit on the left, which is where the optional cupholder would go). It looks like you need a full kit with a replacement cage to use the one you linked.

If you read the description on the ebay add. it’s the same one as you’ve brougjt. also 3d printed. somthing must be wrong then dude. i’ve had 3 off the guy and all been bang on. message him and see what he says?

39 minutes ago, DexxAllen said:

If you read the description on the ebay add. it’s the same one as you’ve brougjt. also 3d printed. somthing must be wrong then dude. i’ve had 3 off the guy and all been bang on. message him and see what he says?

I'm pretty sure he's talking about the one I linked. Because I've had the exact same issue with it. Danny didn't reply when I messaged him I'm afraid.

6 hours ago, richard_56 said:

I believe there are some OEM ones for sale on this eBay link:

https://www.ebay.co.uk/itm/Skoda-Fabia-MK1-Radio-Cover-Top-Fascia-dashboard-VRS-DIN-Surround-Adapter/154006072318?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Ordered one myself, will let you know when it arrives.

 

I bought the one you linked and I couldn't get it to fit. The position of the clips looks like it is expecting the entire inner cage to be removed (aside from the bit on the left, which is where the optional cupholder would go). It looks like you need a full kit with a replacement cage to use the one you linked.

I've just ordered it myself. Managed to get that one to fit in the end by cutting it down, but then ended up snapping the bottom piece.

48 minutes ago, DexxAllen said:

If you read the description on the ebay add. it’s the same one as you’ve brougjt. also 3d printed. somthing must be wrong then dude. i’ve had 3 off the guy and all been bang on. message him and see what he says?

Sorry if my post was unclear, it is the autoleads one that doesn't fit. My 3d printed one hasn't arrived yet, I purchased it after my bad experience with the autoleads one, waiting for it to arrive.

I have received the 3D printed one from this ebay listing.

https://www.ebay.co.uk/itm/Skoda-Fabia-MK1-Radio-Cover-Top-Fascia-dashboard-VRS-DIN-Surround-Adapter/154006072318?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

It fits pretty well, but the 3D printed plastic does not match in colour very well. It's certainly better than how it looks without it though.

 

1 hour ago, richard_56 said:

I have received the 3D printed one from this ebay listing.

https://www.ebay.co.uk/itm/Skoda-Fabia-MK1-Radio-Cover-Top-Fascia-dashboard-VRS-DIN-Surround-Adapter/154006072318?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

It fits pretty well, but the 3D printed plastic does not match in colour very well. It's certainly better than how it looks without it though.

 

Better than most mine looks haha