Skip to content

Late 2014 Mk3 vRS Combi Daily Driver

Featured Replies

Hi mate. What reversing camera did you order? Do you have a link? Thanks.

  • Author

Hopefully this works -https://a.aliexpress.com/_mORcqht

 

Camera A was perfect fit for me.

 

I used this thread as a reference - 

 

Hope that helps 😊

  • Author

Another AliExpress purchase - I may have a slight addiction 😂

 

Flappy paddle extensions 😎

 

Before

20210304_084214.thumb.jpg.09c03effde938bf01361da76f398b2a1.jpg

 

Paddles - I went with black as I wanted subtle rather than in your face

20210304_084229.thumb.jpg.5cb6d81e2e70ce4d6903acf679a12fa1.jpg

 

20210304_084218.thumb.jpg.a8e9b2d84c43dd21cfc3af8fcbcfdbad.jpg

 

End result. Admittedly I've rarely used the steering controls, will see if these encourage me to use them more 🤔

20210304_084606.thumb.jpg.0e0c9af96d6e0bea5f6de09c303f2232.jpg

  • Author

Another little update - drivers foot rest. Not a perfect fit, but for €15 it's good enough 😊

 

One screw in the side, slight wiggling, job done. 2 mins max once I had the right torx bit. 

 

20210308_164240.thumb.jpg.15ac90afb45c6b6afcfb231b64243345.jpg

  • 3 weeks later...
  • Author

After getting the hump waiting for a bonnet strut kit to arrive from AliExpress (ordered 27th January and should have arrived by March 4th) I went on Amazon last week and ordered the struts and ball bolts which arrived in less than a week. Fitted today which was easy as pie. Should have had an M10 spline bit for the screws in the bonnet but chanced an m8 Allen key which worked perfect. 4 screws out, 4 bolts in, click the struts in place, done 😁

 

20210324_130911.thumb.jpg.685255c7b9241baac929532e587714e6.jpg

6 minutes ago, Combi_Bob said:

After getting the hump waiting for a bonnet strut kit to arrive from AliExpress (ordered 27th January and should have arrived by March 4th) I went on Amazon last week and ordered the struts and ball bolts which arrived in less than a week. Fitted today which was easy as pie. Should have had an M10 spline bit for the screws in the bonnet but chanced an m8 Allen key which worked perfect. 4 screws out, 4 bolts in, click the struts in place, done 😁

 

20210324_130911.thumb.jpg.685255c7b9241baac929532e587714e6.jpg

Your consignment must have been shipped on the proverbial slow boat!  

On 08/03/2021 at 16:50, Combi_Bob said:

Another little update - drivers foot rest. Not a perfect fit, but for €15 it's good enough 😊

 

One screw in the side, slight wiggling, job done. 2 mins max once I had the right torx bit. 

 

20210308_164240.thumb.jpg.15ac90afb45c6b6afcfb231b64243345.jpg

I like the footrest - does it require new holes to be drilled?

  • Author
14 minutes ago, Warrior193 said:

I like the footrest - does it require new holes to be drilled?

Nope. Hole its already in place and lines up with the original. 

17 minutes ago, Warrior193 said:

Your consignment must have been shipped on the proverbial slow boat!  

Indeed. And it'll probably arrive tomorrow now 😂

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.